Reinforcement HelicalRebar/pl: Difference between revisions
(Updating to match new version of source page) |
(Updating to match new version of source page) |
||
Line 35: | Line 35: | ||
# A [[task panel]] will pop-out on the left side of the screen as shown below. |
# A [[task panel]] will pop-out on the left side of the screen as shown below. |
||
# Select the desired orientation. |
# Select the desired orientation. |
||
# Populate the inputs like 'Left Cover', Right Cover, Top Cover, 'Bottom Cover', 'Front Cover', 'Bent Angle', 'Bent Factor', 'Rounding' and 'Diameter' of the rebar. |
# Populate the inputs like 'Left Cover', 'Right Cover', 'Top Cover', 'Bottom Cover', 'Front Cover', 'Bent Angle', 'Bent Factor', 'Rounding' and 'Diameter' of the rebar. |
||
# Select the mode of distribution either 'Amount' or 'Spacing'. |
# Select the mode of distribution either 'Amount' or 'Spacing'. |
||
#* If 'Spacing' is selected, a user can also opt for [[Custom_Spacing|custom spacing]]. |
#* If 'Spacing' is selected, a user can also opt for [[Custom_Spacing|custom spacing]]. |
||
Line 54: | Line 54: | ||
==Scripting== |
==Scripting== |
||
{{Emphasis|See also:}} [[Arch API|Arch API]], [[Reinforcement API|Reinforcement API]] and [[FreeCAD Scripting Basics|FreeCAD Scripting Basics]]. |
{{Emphasis|See also:}} [[Arch API|Arch API]], [[Reinforcement API|Reinforcement API]] and [[FreeCAD Scripting Basics|FreeCAD Scripting Basics]]. |
||
The Helical Rebar tool can be used in [[ |
The Helical Rebar tool can be used in [[Macros|macros]] and from the [[Python|Python]] console by using the following function: |
||
{{Code|code= |
{{Code|code= |
Revision as of 12:06, 19 May 2023
Arch Rebar Helical |
Menu location |
---|
Arch → Rebar tools → Helical Rebar 3D/BIM → Reinforcement tools → Helical Rebar |
Workbenches |
Arch, BIM |
Default shortcut |
None |
Introduced in version |
0.17 |
See also |
Reinforcement, Arch Rebar, Arch Rebar Stirrup, Arch Rebar Column Reinforcement |
Description
The Helical Rebar tool allows the user to create a continuous helical reinforcing bar inside an Arch Structure object.
The Helical Rebar tool is also integrated into BIM Workbench.
This command is part of the Reinforcement Workbench, an external workbench that can be installed with the Addon Manager via the Tools → Addon manager → Reinforcement menu.
One continuous helical reinforcement bar inside an Arch Structure
Usage
- Select any face of a previously created Arch Structure object.
- Then select Helical Rebar from the rebar tools.
- A task panel will pop-out on the left side of the screen as shown below.
- Select the desired orientation.
- Populate the inputs like 'Left Cover', 'Right Cover', 'Top Cover', 'Bottom Cover', 'Front Cover', 'Bent Angle', 'Bent Factor', 'Rounding' and 'Diameter' of the rebar.
- Select the mode of distribution either 'Amount' or 'Spacing'.
- If 'Spacing' is selected, a user can also opt for custom spacing.
- Pick Selected Face is used to verify or change the face for rebar distribution.
- Click OK or Apply to generate the rebars.
- Click Cancel to exit the task panel.
Taskview panel for the Arch Rebar Helical tool
Properties
- DANESide Cover: The distance between rebar to the curved face.
- DANETop Cover: The distance between rebar from the top face of the structure.
- DANEBottom Cover: The distance between rebar from the bottom face of the structure.
- DANEPitch: The pitch of a helix is the height of one complete helix turn, measured parallel to the axis of the helix.
- DANEDiameter: Diameter of the rebar.
Scripting
See also: Arch API, Reinforcement API and FreeCAD Scripting Basics.
The Helical Rebar tool can be used in macros and from the Python console by using the following function:
Rebar = makeHelicalRebar(s_cover, b_cover, diameter, t_cover, pitch, structure=None, facename=None)
- Creates a
Rebar
object from the givenstructure
, which is an Arch Structure, andfacename
, which is a face of that structure.- If no
structure
norfacename
are given, it will take the user selected face as input.
- If no
s_cover
,b_cover
, andt_cover
are inner offset distances for the rebar with respect to the faces of the structure. They are respectively the side, bottom, and top offsets.diameter
is the diameter of the reinforcement spiral inside the structure.pitch
is the parameter that determines how close or far apart each spiral loop is to each other.
Example
import FreeCAD, Draft, Arch, HelicalRebar
Circle = Draft.makeCircle(radius=250)
Structure = Arch.makeStructure(Circle)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
Rebar = HelicalRebar.makeHelicalRebar(10, 50, 8, 50, 50, structure, "Face2")
Edition of the rebar
You can change the properties of the rebar with the following function
editHelicalRebar(Rebar, s_cover, b_cover, diameter, t_cover, pitch, structure=None, facename=None)
Rebar
is a previously createdHelicalRebar
object.- The other parameters are the same as required by the
makeHelicalRebar()
function. structure
andfacename
may be omitted so that the rebar stays in the original structure.
import HelicalRebar
HelicalRebar.editHelicalRebar(Rebar, 20, 100, 20, 20, 100)
środowisko pracy Architektura
- Elementy: Mury, Konstrukcja, ściana kurtynowa, Okna, Drzwi, Dach, Kubatura, Schody, Wyposażenie, Ramy, Ogrodzenie, Kratownica, Profil, Rura, Kształtka
- Zbrojenie: Pręty zbrojeniowe proste, Pręty zbrojeniowe typu U, Pręty zbrojeniowe typu L, Strzemiona, Strzemiona, Pręty zbrojeniowe spiralne, Zbrojenie słupów, Zbrojenie belek, Zbrojenie płyt stropowych, Zbrojenie stóp fundamentowych, Pręt zbrojeniowy
- Panels: Panel, Panelizacja do cięcia, Arkusz panela, Zagnieżdżanie
- Materiał: Wybór materiału, Materiał złożony
- Organizacja: Część budowli, Projekt, Teren, Budowla, Piętro, Odniesienie, Płaszczyzna przekroju, Obmiar
- Osie: Osie, Układ osi, Siatka
- Modifikacja: Płaszczyzna cięcia, Komponent dodaj, Komponent usuń, Przegląd
- Narzędzia: Komponent, Klonuj komponent, Podziel siatkę, Siatka na kształt, Zaznacz siatki nie bryłowe, Usuń kształt., Zamknij otwory, Połącz ściany, Sprawdź, Przełącz flagę Brep IFC, Trzy widoki, Arkusz kalkulacyjny IFC, Przełącz widoczność odjęcia
- Dodatkowe: Preferencje, Ustawienia Importu i Eksportu (IFC, DAE, OBJ, JSON, 3DS); SHP), Architektura: API
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework