Mesh SegmentationBestFit/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav/pl |Utwórz segmenty siatki |Wygładzanie |środowisko pracy Siatka |IconL=Mesh_Segmentation.svg...")
(Created page with "{{GuiCommand/pl |Name=Mesh SegmentationBestFit |Name/pl=Siatka Utwórz segmenty z najlepiej dopasowanych powierzchni |MenuLocation=Siatki → Utwórz segmenty z najlepiej dopa...")
Line 10: Line 10:
}}
}}


{{GuiCommand
{{GuiCommand/pl
|Name=Mesh SegmentationBestFit
|Name=Mesh SegmentationBestFit
|Name/pl=Siatka Utwórz segmenty z najlepiej dopasowanych powierzchni
|MenuLocation=Meshes → Create mesh segments from best-fit surfaces...
|MenuLocation=Siatki → Utwórz segmenty z najlepiej dopasowanych powierzchni ...
|Workbenches=[[Mesh_Workbench|Mesh]]
|Workbenches=[[Mesh_Workbench/pl|Siatka]]
|SeeAlso=[[Mesh_Segmentation|Mesh Segmentation]]
|SeeAlso=[[Mesh_Segmentation/pl|Utwórz segmenty siatki]]
}}
}}



Revision as of 16:20, 17 December 2022

Other languages:

Siatka Utwórz segmenty z najlepiej dopasowanych powierzchni

Lokalizacja w menu
Siatki → Utwórz segmenty z najlepiej dopasowanych powierzchni ...
Środowisko pracy
Siatka
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Utwórz segmenty siatki

Description

The Mesh SegmentationBestFit command creates separate mesh segments for specified surface types of a mesh object. The command can also identify their parameters which can be useful when re-engineering a mesh object.

Usage

  1. If you plan to identify the parameters of a surface type, note that the command uses the color red to mark the faces selected for this option. To see them properly:
    • The WIDOKDisplay Mode of the mesh object ideally should be Flat lines, but should at least show faces. If necessary use the Std DrawStyle command to override this property.
    • The WIDOKShape Color of the mesh object should not be red.
  2. Select a single mesh object.
  3. There are several ways to invoke the command:
    • Press the Mesh SegmentationBestFit button.
    • Select the Meshes → Create mesh segments from best-fit surfaces... option from the menu.
  4. The Mesh segmentation task panel opens.
  5. Optionally press one of the Parameters... buttons to identify the parameters of a surface:
    • The Surface fit dialog box opens.
    • Select one or more faces belonging to the surface:
      • Press the Region button and while holding down the left mouse button draw a region, a closed spline, in the 3D view. Faces that (partially) fall inside the region will be selected.
      • Press the Triangle button to select individual faces.
      • Optionally press the Clear button to clear the selection.
    • Press the Compute button to calculate the parameters.
    • Press the OK or Cancel button to close the dialog box.
  6. Select the surface type(s) you wish to create mesh segments for:
    • Plane
    • Cylinder
    • Sphere
  7. Specify the Tolerance values.
  8. Specify the Minimum number of faces values.
  9. Press the OK button.
  10. The command will create a group containing separate mesh objects, each a segment of the original mesh object.
  11. If the created group is empty try using the command again with modified settings.