Mesh RemeshGmsh/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Użycie==")
(Created page with "==Uwagi==")
Line 35: Line 35:
# Press the {{Button|Close}} button to close the task panel and finish the command.
# Press the {{Button|Close}} button to close the task panel and finish the command.


==Notes==
==Uwagi==


* In some cases this command will produce a mesh with flipped normals. The [[Mesh_FlipNormals|Mesh FlipNormals]] command can be used to correct this.
* In some cases this command will produce a mesh with flipped normals. The [[Mesh_FlipNormals|Mesh FlipNormals]] command can be used to correct this.

Revision as of 16:34, 26 September 2022

Other languages:

Siatka: Ulepsz przez Gmsh

Lokalizacja w menu
Siatki → Ulepszanie ...
Środowisko pracy
Siatka
Domyślny skrót
brak
Wprowadzono w wersji
0.19
Zobacz także
Siatka z kształtu

Opis

Polecenie Ulepsz ... ponownie przetwarza obiekt siatkowy przy użyciu generatora siatek Gmsh. Nowa siatka może być drobniejsza lub grubsza.

Użycie

  1. Select a single mesh object.
  2. There are several ways to invoke the command:
    • Press the Mesh RemeshGmsh button.
    • Select the Meshes → Refinement... option from the menu.
  3. The Remesh by gmsh task panel opens.
  4. Specify the required settings. See the Gmsh mesher settings of the Mesh FromPartShape command.
  5. Press the Apply button to remesh the mesh object.
  6. Optionally change one or more settings and again press the Apply button until the new mesh is to your liking.
  7. Press the Close button to close the task panel and finish the command.

Uwagi

  • In some cases this command will produce a mesh with flipped normals. The Mesh FlipNormals command can be used to correct this.

Properties

See: Mesh Feature.