MeshPart CreateFlatMesh/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/pl |Name=MeshPart CreateFlatMesh |Name/pl=Projekt Siatki: Rozwiń powierzchnię |MenuLocation=Siatki → Rozwiń powierzchnię |Workbenches=Mesh_Workbench/pl|ś...")
(Created page with "==Opis==")
Line 18: Line 18:
}}
}}


==Description==
==Opis==


The '''MeshPart CreateFlatMesh''' command creates a flat representation of a mesh object by unwrapping, unfolding, it. The created outline is a [[Part_Feature|Part Feature]].
The '''MeshPart CreateFlatMesh''' command creates a flat representation of a mesh object by unwrapping, unfolding, it. The created outline is a [[Part_Feature|Part Feature]].

Revision as of 08:56, 18 December 2022

Other languages:

Projekt Siatki: Rozwiń powierzchnię

Lokalizacja w menu
Siatki → Rozwiń powierzchnię
Środowisko pracy
środowisko pracy Siatka
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Rozwiń siatkę

Opis

The MeshPart CreateFlatMesh command creates a flat representation of a mesh object by unwrapping, unfolding, it. The created outline is a Part Feature.

A mesh object and, in red, its flat representation

Usage

  1. Select a single mesh object. The mesh must be 'unwrappable'. For example, to unwrap a cylindrical mesh it must have open ends and an open seam. Also curved surfaces must have a relatively fine mesh. Use the Mesh RemeshGmsh command if necessary.
  2. Select the Meshes → Unwrap Mesh option from the menu.

Properties

See: Part Feature.