FEM ElementRotation1D/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav |Przekrój poprzeczny belki |Grubość powłoki |MES |IconL=FEM_ElementGeometry1D.svg |IconR=FEM_ElementGeometry2D.svg |IconC=Workbench_FEM.svg }}")
(Created page with "{{GuiCommand/pl |Name=FEM ElementRotation1D |Name/pɬMES Obrót belki |MenuLocation=Model → Geometria elementu → Obrót belki |Workbenches=MES |SeeAlso=Poradniki MES }}")
Line 11: Line 11:
}}
}}


{{GuiCommand
{{GuiCommand/pl
|Name=FEM ElementRotation1D
|Name=FEM ElementRotation1D
|Name/pɬMES Obrót belki
|MenuLocation=Model → Element GeometryBeam rotation
|MenuLocation=Model → Geometria elementuObrót belki
|Workbenches=[[FEM_Workbench|FEM]]
|Workbenches=[[FEM_Workbench/pl|MES]]
|SeeAlso=[[FEM_tutorial|FEM tutorial]]
|SeeAlso=[[FEM_tutorial/pl|Poradniki MES]]
}}
}}



Revision as of 13:38, 18 November 2023

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

FEM ElementRotation1D

Lokalizacja w menu
Model → Geometria elementu → Obrót belki
Środowisko pracy
MES
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Poradniki MES

Description

ElementRotation1D is used to rotate the beam profile around the axis of beam elements.

Usage

  1. There are several ways to invoke the command:
    • Press the Beam rotation button.
    • Select the Model → Element Geometry → Beam rotation option from the menu.
  2. Specify the angle by which the beam profile is to be rotated.

Options

Properties

Limitations

  • Currently, multiple rotations are not supported (a single rotation is applied to all beams in the model).

Notes

  • To visualize the rotated cross-section it is necessary to set Beam Shell Result Output 3D in the FEM SolverCalculixCxxtools to True and run the analysis.