MES: Pokaż wyniki
Pokaż wyniki |
Lokalizacja w menu |
---|
Wyniki → Pokaż wyniki |
Środowisko pracy |
MES |
Domyślny skrót |
R S |
Wprowadzono w wersji |
- |
Zobacz także |
Prezentacja graficzna wyników, Poradnik MES |
Opis
The ResultShow command opens the dialog for a FEM results object. A Result object is automatically created when a FEM analysis was performed using either the solver Calculix or Z88.
A Result object holds the resulting mesh and allows to visualize results. It is designed and therefore limited to thermomechanical results. Except for the Solver Elmer, it can be used as alternative to a result pipeline. A result pipeline can be used to visualize any kind of results (also electrical etc.).
The units used for the Result object are those of the set unit system while for a result pipelines, the units are SI.
The visualization of the results is only active when the dialog is open. However, the dialog settings are stored in the FreeCAD model file.
Usage
To show the result dialog, select the result object in the Tree view, then either press the toolbar button Show result or use the menu Results → Show result (sortcut R then S). Alternatively you can also double-click on the result object in the tree view.
When the dialog is open, the result mesh will automatically be shown.
The dialog is shown at the left and offers the following features:
- Select a result type and the minimum and maximum will be displayed in the dialog. The result mesh will be colored accordingly.
- Click on the button Histogram to get a histogram what amount of result mesh nodes have a certain result. The histogram plot can be modified by the buttons in its toolbar. it is also possible to save the histogram as image using the save button from its toolbar.
- Check the option Show to enables the slider and to visualize the result mesh deformation. The slider value is a factor with which the result Displacement Magnitude is multiplied.
Note: The slider only affects the Displacement Magnitude, not its X, Y, Z components.
- With the button Calculate you can perform calculations of the results. Input in the text box below the button an equation of you choice. Predefined is the equation P1-P3. This means the result Min Principal Stress is subtracted from the Max Principal Stress. The variables for the possible results are explained in the box User defined equation.
After you input an equation press the button and the result will be shown in the fields displaying the minimum and maximum. The result mesh will be colored accordingly.
Note: The calculation results always have the unit MPa, mm or T, no matter what unit system you use.
- Materiał: Bryła, Ciecz, Nieliniowy materiał mechaniczny, Materiał zbrojony (beton), Edytor materiału
- Geometria elementu: Geometria elementu, Obrót w okół osi, Geometria elementu 2D, Element przepływu
Wiązania
- Elektromagnetyczne: Potencjał elektryczny, Gęstość prądu, Magnetyzacja
- Geometryczne: Obrót w płaszczyźnie, Zapis wyników z przekroju, Zdefiniuj odkształcenie
- Mechaniczne: Zdefiniuj przytwierdzenie, Zdefiniuj przemieszczenie, Zdefiniuj kontakt, Zdefiniuj powiązanie, Wiązanie sprężyny, Zdefiniuj siłę, Zdefiniuj obciążenie ciśnieniem, Zdefiniuj siłę odśrodkową, Zdefiniuj obciążenie ciężarem własnym
- Termiczne: Warunek początkowy temperatury, Zdefiniuj strumień ciepła, Zdefiniuj temperaturę, Zdefiniuj objętościowe źródło ciepła
- Zmieniające wiązania: Zdefiniuj przenikalność elektryczną próżni
- Siatki: Siatka Netgen, Siatka GMSH, Warstwa graniczna siatki, Obszar siatki, Grupa siatki, Utwórz zestaw węzłów, Siatka MES na obiekt środowiska Siatka
- Solver: Narzędzia CalculiX, Elmer, Mystran, Z88; Równania: Elastyczności, Elektrostatyczne, Siły elektrostatycznej, Magnetodynamiczne, RMagnetodynamiczne 2D, Przepływu, Strumienia, Ciepła; Solver: Kontrola pracy solvera, Uruchom solver
- Wyniki: Oczyszczanie z wyników, Prezentacja wyników; Postprocessing: Zastosuj zmiany, Prezentacja graficzna, Filtr rozpraszający, Skalarny filtr obcinający, Filtr odcięcia funkcji, Filtr odcięcia obszaru, Filtr konturów, Filtr danych wzdłuż linii, Wykres liniowości naprężeń, Filtr obcinania danych w punkcie, Utwórz funkcję, Filtr funkcji płaszczyzny, Filtr funkcji sfery, Filtr funkcji walca, Filtr funkcji prostopadłościanu
- Dodatkowe: Konfiguracja, Instalacja środowiska MES, Siatka, FEM Solver, CalculiX, Beton, Rodzaje elementów
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Złożenie, BIM, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework