Rysunek Techniczny: Dodaj oś ściany

From FreeCAD Documentation
Revision as of 07:34, 22 July 2023 by Kaktus (talk | contribs) (Created page with "# Wybierz jedną lub więcej ścian w widoku. # Naciśnij przycisk {{Button|16px Dodaj oś ściany}}. # Otworzy się okno dialogowe, w którym można określić atrybuty nowej linii środkowej. # Linia środkowa zostanie dodana w punkcie środkowym obwiedni wybranej ściany ''(ścian)''.")

Rysunek Techniczny: Dodaj oś ściany

Lokalizacja w menu
Rysunek Techniczny → Dodaj linie → Dodaj oś ściany
Środowisko pracy
Rysunek Techniczny
Domyślny skrót
brak
Wprowadzono w wersji
0.19
Zobacz także
Dodaj wierzchołek kosmetyczny, Dodaj oś pomiędzy dwiema liniami, Dodaj oś pomiędzy dwoma punktami, Usuń geometrie pomocnicze

Opis

Narzędzie Dodaj oś ściany dodaje linię środkową do wybranych ścian.

Oś dodana do ściany.

Użycie

  1. Wybierz jedną lub więcej ścian w widoku.
  2. Naciśnij przycisk Dodaj oś ściany.
  3. Otworzy się okno dialogowe, w którym można określić atrybuty nowej linii środkowej.
  4. Linia środkowa zostanie dodana w punkcie środkowym obwiedni wybranej ściany (ścian).

To delete a Centerline, select it and use the toolbar button Remove Cosmetic Object.

Editing Centerlines

Any of the centerline command buttons ( Add Centerline to Face(s), Add Centerline between 2 Lines, Add Centerline between 2 Points) can be used to edit any centerline.

  1. Select a centerline.
  2. Press any centerline command button.
  3. A dialog will open where you can change attributes of the centerline.
  4. Press OK to see your changes.

Properties

Centerlines have no properties of their own, as they are no document objects. They have attributes that can be changed in the centerline edit dialog.

  1. Mode (radio buttons):
    • Vertical: Forces a centerline vertical
    • Horizontal: Forces a centerline horizontal
    • Aligned: This option is not possible for centerline to faces
  2. Shift Horiz: Moves the centerline left or right of its normal position
  3. Shift Vert: Moves the centerline up or down from its normal position
  4. Rotate: Rotates the centerline around its center (degrees. + counterclockwise, - clockwise)
  5. Extend: Makes the centerline longer by this amount
  6. Color: Color of centerline
  7. Weight: Thickness of the centerline
  8. Style: Continuous, Dash, Dot, DashDot, DashDotDot

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

Centerlines are not accessible from macros or the Python console at this time.

Notes

  • FaceCenterLine will eventually replace two View properties:
    • WIDOKHorizCenterLine: Show a horizontal centerline through view.
    • WIDOKVertCenterLine: Show a vertical centerline through view.