Rysunek Techniczny: Dodaj okrąg kosmetyczny

From FreeCAD Documentation
Revision as of 12:23, 22 September 2023 by Kaktus (talk | contribs) (Created page with "==Użycie==")
Other languages:

Rysunek Techniczny Okrąg kosmetyczny

Lokalizacja w menu
Rysunek Techniczny → Dodaj linie → Dodaj okrąg kosmetyczny
Środowisko pracy
Rysunek Techniczny
Domyślny skrót
brak
Wprowadzono w wersji
0.22
Zobacz także
Dodaj linię kosmetyczną wytyczoną przez dwa punkty

Opis

Narzędzie Dodaj okrąg kosmetyczny dodaje okrąg kosmetyczny w wybranym punkcie środka. Punkt może znajdować się w przestrzeni 2D lub 3D.

Geometria okręgu pomocniczego

Użycie

  1. Select a center point in a TechDraw View or in the 3D view.
  2. If you have selected a point in the 3D view: add the correct TechDraw View to the selection by selecting it in the Tree view.
  3. There are several ways to invoke the tool:
    • Press the Add Cosmetic Circle button.
    • Select the TechDraw → Add Lines → Add Cosmetic Circle option from the menu.
  4. A task panel opens.
  5. Optionally adjust the coordinates of the center point, the radius, and the start and end angles of the circle.
  6. Press the OK button.
  7. A cosmetic circle is added. In the case of a 3D center point, the circle is located at the projection of the point.

Usage edit

To change the attributes of a cosmetic circle:

  1. Select the cosmetic circle.
  2. There are several ways to invoke the tool:
    • Press the Add Cosmetic Circle button.
    • Select the TechDraw → Add Lines → Add Cosmetic Circle option from the menu.
  3. A task panel opens.
  4. Adjust the coordinates of the center point, the radius, or the start and end angles of the circle.
  5. Press the OK button.

Notes

Properties

Cosmetic circles have no properties of their own, as they are not document objects.

Scripting

Cosmetic circles can be created using the makeCosmeticCircle(center, radius, start angle, end angle) method of DrawViewPart.