TechDraw 2PointCenterLine/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/pl |Name=TechDraw 2PointCenterLine |Name/pl=Rysunek Techniczny: Dodaj oś pomiędzy dwoma punktami |MenuLocation=Rysunek Techniczny → Dodaj Linię → Dodaj oś pomiędzy dwoma punktami |Workbenches=Rysunek Techniczny |Version=0.19 |SeeAlso=Dodaj oś ściany, Dodaj linię środkową pomiędzy dwoma liniami }}")
(Created page with "Narzędzie '''Dodaj oś pomiędzy dwoma punktami''' dodaje linię środkową pomiędzy dwoma wierzchołkami ''(punktami)''.")
Line 22: Line 22:
==Opis==
==Opis==


Narzędzie '''Dodaj oś pomiędzy dwoma punktami''' dodaje linię środkową pomiędzy dwoma wierzchołkami ''(punktami)''.
The '''TechDraw 2PointCenterLine''' tool adds a centerline between two Vertices (Points).


[[Image:CL2PointsSample.png|200px]]
[[Image:CL2PointsSample.png|200px]]

Revision as of 08:58, 22 July 2023

Rysunek Techniczny: Dodaj oś pomiędzy dwoma punktami

Lokalizacja w menu
Rysunek Techniczny → Dodaj Linię → Dodaj oś pomiędzy dwoma punktami
Środowisko pracy
Rysunek Techniczny
Domyślny skrót
brak
Wprowadzono w wersji
0.19
Zobacz także
Dodaj oś ściany, Dodaj linię środkową pomiędzy dwoma liniami

Opis

Narzędzie Dodaj oś pomiędzy dwoma punktami dodaje linię środkową pomiędzy dwoma wierzchołkami (punktami).

Centerline between 2 Points

Usage

  1. Select 2 Vertexes in a View.
  2. Press the Add Centerline between 2 Points button
  3. A dialog will open where you can specify attributes of the new centerline.
  4. A centerline will be added between the 2 selected Vertices.

To delete a Centerline, select it and use the toolbar button Remove Cosmetic Object.

Editing Centerlines

Any of the centerline command buttons ( Add Centerline to Face(s), Add Centerline between 2 Lines, Add Centerline between 2 Points) can be used to edit any centerline.

  1. Select a centerline.
  2. Press any centerline command button.
  3. A dialog will open where you can change attributes of the centerline.
  4. Press OK to see your changes.

Properties

Centerlines have no properties of their own, as they are no document objects. They have attributes that can be changed in the centerline edit dialog.

  1. Mode (radio buttons):
    • Vertical: Forces a centerline vertical
    • Horizontal: Forces a centerline horizontal
    • Aligned: Follows the general direction of the Edge for 2 Edge centerline
  2. Shift Horiz: Moves the centerline left or right of its normal position
  3. Shift Vert: Moves the centerline up or down from its normal position
  4. Rotate: Rotates the centerline around its center (degrees. + counterclockwise, - clockwise)
  5. Extend: Makes the centerline longer by this amount
  6. Color: Color of centerline
  7. Weight: Thickness of the centerline
  8. Style: Continuous, Dash, Dot, DashDot, DashDotDot

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

Centerlines are not accessible from macros or the Python console at this time.