Surface Workbench/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "Środowisko pracy Powierzchnia umożliwia tworzenie powierzchni za pomocą kształtów, co nie jest możliwe przy użyciu standardowych narzędzi w innych środowiskach pracy.")
(Created page with "{{Caption|Powierzchnia utworzona na podstawie szkiców umieszczonych w płaszczyznach odniesienia za pomocą narzędzi środowiska Projekt Części.}}")
Line 31: Line 31:
[[File:Toy_Duck.png|350px]]
[[File:Toy_Duck.png|350px]]


{{Caption|Powierzchnia utworzona na podstawie szkiców umieszczonych w płaszczyznach odniesienia za pomocą narzędzi środowiska [[PartDesign_Workbench/pl|Projekt Części]].}}
{{Caption|Surface created with sketches placed in datum planes with the tools of the [[PartDesign Workbench|PartDesign Workbench]]}}


The Surface Workbench integrates with other workbenches of FreeCAD. The above example was created from {{Button|[[File:Sketcher_NewSketch.svg|16px]] [[Sketch|Sketches]]}} placed on {{Button|[[File:PartDesign_Plane.svg|16px]] [[PartDesign_Plane|PartDesign Datum planes]]}} in the [[File:Workbench_PartDesign.svg|24px]] [[PartDesign_Workbench|PartDesign Workbench]]. The design can be fully parametric if all datum planes and sketches are defined accordingly. In most cases it is sufficient to draw a closed sketch to define the boundary of a face, and then use different options to further modify its shape.
The Surface Workbench integrates with other workbenches of FreeCAD. The above example was created from {{Button|[[File:Sketcher_NewSketch.svg|16px]] [[Sketch|Sketches]]}} placed on {{Button|[[File:PartDesign_Plane.svg|16px]] [[PartDesign_Plane|PartDesign Datum planes]]}} in the [[File:Workbench_PartDesign.svg|24px]] [[PartDesign_Workbench|PartDesign Workbench]]. The design can be fully parametric if all datum planes and sketches are defined accordingly. In most cases it is sufficient to draw a closed sketch to define the boundary of a face, and then use different options to further modify its shape.

Revision as of 18:05, 27 May 2022

Ikonka FreeCAD dla środowiska pracy Powierzchnia

Wprowadzenie

The Surface Workbench provides tools to create and modify simple NURBS surfaces. These tools have a similar functionality to the Part Builder tool when the Face from edges option is used. However, unlike that tool, the tools of the Surface Workbench are parametric and provide additional options. In this respect, the tools in this workbench are similar to PartDesign AdditiveLoft and PartDesign AdditivePipe.

Niektóre z dostępnych funkcji to:

  • Tworzenie powierzchni z krawędzi brzegowych.
  • Wyrównywanie krzywizn z sąsiednich powierzchni.
  • Ograniczanie powierzchni do dodatkowych krzywych i wierzchołków.
  • Rozszerzanie powierzchni.
  • Siatka może być użyta jako szablon do utworzenia krzywych złożonych na jej powierzchni.

Użycie

Środowisko pracy Powierzchnia umożliwia tworzenie powierzchni za pomocą kształtów, co nie jest możliwe przy użyciu standardowych narzędzi w innych środowiskach pracy.

Powierzchnia utworzona na podstawie szkiców umieszczonych w płaszczyznach odniesienia za pomocą narzędzi środowiska Projekt Części.

The Surface Workbench integrates with other workbenches of FreeCAD. The above example was created from Sketches placed on PartDesign Datum planes in the PartDesign Workbench. The design can be fully parametric if all datum planes and sketches are defined accordingly. In most cases it is sufficient to draw a closed sketch to define the boundary of a face, and then use different options to further modify its shape.

The generated surface cannot be placed inside a PartDesign Body. However, the generated surface can be contained inside a Std Part together with the associated PartDesign Body that holds the datum planes and sketches. The non-parametric Part Builder tool can then be used in order to create a shell and finally a solid.

Tools

  • Filling: fills a series of boundary curves with a surface.
  • Extend face: extrapolates the surface at the boundaries with its local U parameter and V parameter.