FEM PostFilterClipRegion/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "Przycina pole przy pomocy kuli lub płaszczyzny przechodzącej przez model.")
(Created page with "''Filtr odcięcia obszaru z kulą jako funkcją odcięcia.</br>Oryginalny obiekt prezentacji graficznej wyników jest półprzezroczysty.''")
Line 25: Line 25:
[[File:FEM_Region-Cut-Filter-Example.png|400px]]
[[File:FEM_Region-Cut-Filter-Example.png|400px]]


''Filtr odcięcia obszaru z kulą jako funkcją odcięcia.</br>Oryginalny obiekt prezentacji graficznej wyników jest półprzezroczysty.''
''A region cut filter with a sphere as cut function.</br>The original pipeline is the semi-transparent object.''


==Usage==
==Usage==

Revision as of 21:51, 22 November 2023

Filtr odcięcia obszaru

Lokalizacja w menu
Wyniki → Filtr odcięcia obszaru
Środowisko pracy
MES
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Prezentacja graficzna wyników, Funkcje filtrów MES, Poradnik MES

Opis

Przycina pole przy pomocy kuli lub płaszczyzny przechodzącej przez model.

Filtr odcięcia obszaru z kulą jako funkcją odcięcia.
Oryginalny obiekt prezentacji graficznej wyników jest półprzezroczysty.

Usage

  1. Select a previously created result pipeline.
  2. Invoke the command either by:
    • Pressing the button Region clip filter button.
    • Using the menu Results → Region clip filter option from the menu.
  3. Adjust the Result display options like for the result pipeline. You might need to hide the pipeline to see the effect of the filter in the preview.
  4. Either
    • If there is no filter function defined yet, press the Create button and select Plane or Sphere
    • Choose an existing filter function from the list. If needed, adjust the cut parameters to make sure that it intersects the model. Note that changed cut parameters will also change the parameters of the used filter function.
  5. The model will be clipped using the filter function. Select the Inside Out option to invert the cut. Select the Cut Cells option to smooth the clipped region by eliminating parts of finite elements that are sticking out.
  6. Click the OK button to finish the command.

Note: If there exist not yet a filter function, you can only directly set a Field after its creation when Apply Changes is on. Otherwise you can first do this after reopening the filter dialog.