MES: Grubość powłoki

From FreeCAD Documentation
Revision as of 09:15, 28 September 2022 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

FEM ElementGeometry2D

Menu location
Model → Element Geometry → Shell plate thickness
Workbenches
FEM
Default shortcut
C S
Introduced in version
-
See also
FEM tutorial

Description

ElementGeometry2D is used to define thickness of 2D FEM elements, all or lying on the chosen surface.

Usage

  1. There are several ways to invoke the command:
    • Press the FEM ElementGeometry2D button.
    • Select the Model → Element Geometry → Shell plate thickness option from the menu.
  2. Define a thickness parameter.
  3. Optionally press the Add button in the task panel and then click on the face you want to have a prescribed thickness. If the face selection is empty, all remaining faces (whose thickness is not defined by other FEM ElementGeometry2D objects) will be automatically assigned.

Limitations

  • Analysis combining shell elements with solid or edge elements is not supported in the current version (FreeCAD 0.18).

Properties

DANEThickness: specifies the thickness of the shell.

Scripting

Notes

For viewing results from CalculiX solver on the mesh expanded to the prescribed thickness, property Beam Shell Result Output 3D in the FEM SolverCalculixCxxtools need to be set to True.