Rysunek Techniczny: Dodaj pasowanie otworu / wału

From FreeCAD Documentation
Revision as of 11:04, 22 July 2023 by Kaktus (talk | contribs) (Created page with "==Użycie==")
Other languages:

Rysunek Techniczny: Dodaj pasowanie otworu / wału

Lokalizacja w menu
Rysunek Techniczny → Dodaj pasowanie otworu / wału
Środowisko pracy
Rysunek Techniczny
Domyślny skrót
brak
Wprowadzono w wersji
0.21
Zobacz także
Wymiarowanie geometrii i tolerancja

Opis

Narzędzie Dodaj pasowanie otworu / wału dodaje tolerancje otworu lub wału przy użyciu ISO 286 do wymiaru liniowego lub wymiaru średnicy.

Po lewej panel zadań, po prawej kilka dodanych tolerancji.

Użycie

  1. Select a single linear dimension (length, horizontal or vertical) or a single diameter dimension.
  2. Press the Add hole or shaft fit button.
  3. A task panel opens.
  4. Specify shaft fit or hole fit as applicable.
  5. Select the desired ISO 286 fit option from the combo box. The corresponding field and the fit type (loose fit, snug fit or press fit) are updated.
  6. Press the OK button.
  7. The selected option and the calculated tolerance values are added to the dimension.