Mesh BuildRegularSolid/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "{{TitleProperty|Sześcian}}")
(Created page with "* {{PropertyData|Wysokość|FloatConstraint}}: wysokość sześcianu. * {{PropertyData|Długość|FloatConstraint}}: długość sześcianu. * {{PropertyData|Szerokość|FloatC...")
Line 55: Line 55:
{{TitleProperty|Sześcian}}
{{TitleProperty|Sześcian}}


* {{PropertyData|Height|FloatConstraint}}: the height of the cube.
* {{PropertyData|Wysokość|FloatConstraint}}: wysokość sześcianu.
* {{PropertyData|Length|FloatConstraint}}: the length of the cube.
* {{PropertyData|Długość|FloatConstraint}}: długość sześcianu.
* {{PropertyData|Width|FloatConstraint}}: the width of the cube.
* {{PropertyData|Szerokość|FloatConstraint}}: szerokość sześcianu.


===[[Image:Mesh_Cylinder.svg|32px]] Cylinder===
===[[Image:Mesh_Cylinder.svg|32px]] Cylinder===

Revision as of 19:11, 17 December 2022

Siatka Utwórz bryłę pierwotną

Lokalizacja w menu
Siatki → Utwórz bryłę pierwotną ...
Środowisko pracy
Siatka
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
brak

Opis

Polecenie Utwórz bryłę pierwotną tworzy regularną parametryczną bryłę obiektu siatkowego.

Użycie

  1. Istnieje kilka sposobów na wywołanie polecenia:
    • Naciśnij przycisk Utwórz bryłę pierwotną.
    • Wybierz z menu opcję Siatki → Utwórz bryłę pierwotną ....
  2. Otworzy się okno dialogowe Bryła pierwotna.
  3. Najpierw wybierz typ obiektu siatkowego z listy rozwijanej:
  4. First select a mesh object type from the dropdown list:
    • Sześcian
    • Walec
    • Stośek
    • Sfera
    • Ellipsoida
    • Torus
  5. Określ wymagane ustawienia. Dostępne ustawienia zależą od typu obiektu siatkowego. Zobacz Właściwości.
  6. Dla siatek z zakrzywionymi powierzchniami: wyższa wartość Próbkowania skutkuje drobniejszą siatką.
  7. Naciśnij przycisk Utwórz, aby utworzyć obiekt siatki.
  8. Opcjonalnie utwórz więcej obiektów siatki.
  9. Naciśnij przycisk Zamknij, aby zamknąć okno dialogowe i zakończyć polecenie.

Uwagi

  • Obiekty siatkowe utworzone za pomocą tego polecenia są parametryczne. Kiedykolwiek są one ponownie obliczane, na przykład po zmianie jednego z ich parametrów, ich siatka jest rekonstruowana. Oznacza to, że manipulowanie nimi za pomocą poleceń takich jak Ulepsz przez Gmsh, Skaluj itp. zwykle nie ma sensu.

Właściwości

Obiekty siatkowe utworzone za pomocą tego polecenia dziedziczą wszystkie właściwości typu Cecha siatki. Dodatkowo każdy typ obiektu siatkowego posiada szereg właściwości pozwalających kontrolować jego parametryczne zachowanie:

Sześcian

Dane

Sześcian

  • DANEWysokość (FloatConstraint): wysokość sześcianu.
  • DANEDługość (FloatConstraint): długość sześcianu.
  • DANESzerokość (FloatConstraint): szerokość sześcianu.

Cylinder

Dane

Base

  • DANEClosed (Bool): if set to false, the planar ends of the cylinder are left open.
  • DANEEdge Length (FloatConstraint): the edge length of the faces in the mesh.
  • DANELength (FloatConstraint): the length of the cylinder.
  • DANERadius (FloatConstraint): the radius of the cylinder.
  • DANESampling (IntegerConstraint): the number of faces along the curved surface.

Cone

Dane

Podstawowe

  • DANEClosed (Bool): if set to false, the planar end(s) of the cone are left open.
  • DANEEdge Length (FloatConstraint): the edge length of the faces in the mesh.
  • DANELength (FloatConstraint): the length of the cone.
  • DANERadius 1 (FloatConstraint): the first radius of the cone. Can be 0.
  • DANERadius 2 (FloatConstraint): the second radius of the cone. Can be 0.
  • DANESampling (IntegerConstraint): the number of faces along the curved surface.

Sphere

Dane

Podstawowe

  • DANERadius (FloatConstraint): the radius of the sphere.
  • DANESampling (IntegerConstraint): the number of faces along both directions of the curved surface.

Ellipsoid

Dane

Podstawowe

  • DANERadius 1 (FloatConstraint): the first radius of the ellipsoid.
  • DANERadius 2 (FloatConstraint): the second radius of the ellipsoid.
  • DANESampling (IntegerConstraint): the number of faces along both directions of the curved surface.

Torus

Dane

Podstawowe

  • DANERadius 1 (FloatConstraint): the first (main) radius the torus.
  • DANERadius 2 (FloatConstraint): the second radius of the torus.
  • DANESampling (IntegerConstraint): the number of faces along both directions of the curved surface.