FEM Preferences/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "W zakładce ''Z88'' można wybrać następujące opcje:")
(Created page with "W zakładce ''Materiał'' można wybrać następujące opcje:")
Line 108: Line 108:
==Material==
==Material==


W zakładce ''Materiał'' można wybrać następujące opcje:
On the ''Material'' tab you can specify the following:


{| class="wikitable float-right mw-collapsible mw-uncollapsed"
{| class="wikitable float-right mw-collapsible mw-uncollapsed"

Revision as of 10:16, 22 May 2022

Ekran preferencji środowiska pracy MES znajduje się w Edytorze ustawień, Edycja → Preferencje ... → MES.

W preferencjach środowiska pracy MES znajduje się kilka zakładek, poczynając od Ogólnej konfiguracji środowiska. Pozostałe zakładki określają sposób współpracy MES z obsługiwanymi zewnętrznymi solverami.

Obecnie obsługiwane są następujące solvery zewnętrzne:

Ogólne

W zakładce Ogólne można wybrać następujące opcje:

Gmsh

W zakładce Gmsh można wybrać następujące opcje:

Name Description
Search in known binary directories If checked, FreeCAD will look for the binary of Gmsh in known (usual) directories
Gmsh binary path The path to the the binary of Gmsh

CalculiX

W zakładce CalculiX można wybrać następujące opcje:

Elmer

W zakładce Elmer można wybrać następujące opcje:

Name Description
ElmerGrid: Search in known binary directories If checked, FreeCAD will look for the binary of the grid writer utility of the Elmer in known (usual) directories
ElmerGrid binary path The path to the the binary of the grid writer utility of the Elmer
ElmerSolver: Search in known binary directories If checked, FreeCAD will look for the solver binary of Elmer in known (usual) directories
ElmerSolver binary path The path to the the solver binary of Elmer

Mystran

W zakładce Mystran można wybrać następujące opcje:

Name Description
Search in known binary directories If checked, FreeCAD will look for the binary of the Mystran in known (usual) directories
Mystran binary path The path to the the binary of the Mystran

Z88

W zakładce Z88 można wybrać następujące opcje:

Name Description
Search in known binary directories If checked, FreeCAD will look for the binary named z88r of the Z88 solver in known (usual) directories
z88r binary path The path to the the binary named z88r of the Z88 solver
Solver method The solver method used by the Z88 solver for new simulations.
Max places in stiffness matrix This is relevant when the solver method Simple Cholesky is used. After starting the solver, it might tell you that you need to increase the MAXGS value. In this case increase the max places and re-run the solver.
Max places in coincidence vector This is relevant when one of the iterative solver methods is used. After starting the solver, it might tell you that you need to increase the MAXKOI value. In this case increase the max places and re-run the solver.

Material

W zakładce Materiał można wybrać następujące opcje:

Name Description
Use built-in materials The cards built-in to FreeCAD will be listed as available.
Use materials from Materials directory in user's FreeCAD preference directory The cards from FreeCAD's preferences directory will be listed as available. On Windows, that would for example be this folder:

C:\Users\<username>\AppData\Roaming\FreeCAD\Material

Use materials from user defined directory Also material cards also from the specified directory will be listed as available.
Delete card duplicates Duplicate cards will be deleted from the displayed material card list.
Sort by resources Material cards will appear sorted by their resources (locations). If unchecked, they will be sorted by their name.