MES: Nieliniowy materiał mechaniczny

From FreeCAD Documentation
Revision as of 13:28, 11 November 2023 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

FEM MaterialMechanicalNonlinear

Menu location
Model → Materials → Nonlinear mechanical material
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
FEM tutorial

Description

Adds nonlinear mechanical material model. Currently, only plasticity with simple hardening is available.

Usage

  1. To define nonlinear mechanical material model do the following:
  2. To edit an existing MaterialMechanicalNonlinear object:
    • Click it in the Tree view.
    • Select the material model (currently, only simple hardening is available).
    • Define yield points (stress vs plastic strain). The first point must have a zero plastic strain specified.

Notes

  • In FreeCAD 0.19 and older versions, it's possible to specify only 3 yield points. Since the 0.20 version, this limitation doesn't exist and a list of yield point can contain as many of them as needed.