FEM ConstraintTransform/pl: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Created page with "Przekształca układ współrzędnych powierzchni na określony układ współrzędnych — prostokątny lub cylindryczny.")
Line 20: Line 20:
==Opis==
==Opis==


Przekształca układ współrzędnych powierzchni na określony układ współrzędnych — prostokątny lub cylindryczny.
Transforms the coordinate system of a face to a particular coordinate system - rectangular or cylindrical.


==Użycie==
==Użycie==

Revision as of 09:52, 1 April 2022

MES: Zdefiniuj odkształcenie

Lokalizacja w menu
Model → Wiązania Geometryczne → Zdefiniuj odkształcenie
Środowisko pracy
MES
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Zdefiniuj obrót w płaszczyźnie

Opis

Przekształca układ współrzędnych powierzchni na określony układ współrzędnych — prostokątny lub cylindryczny.

Użycie

  1. Apply the Constraint displacement to a face first.
  2. There are several ways to invoke the command:
    • Press the FEM ConstraintTransform button.
    • Select the Model → Geometrical Constraints → Constraint transform option from the menu.
  3. Select rectangular or cylindrical transform. The former can be applied to any face, the latter is available only for the cylindrical faces.
  4. Select a face to which the displacement constraint was previously applied. Press the Add button.
  5. For rectangular transform, specify a rotation about each of the three axes.

Limitations

  • Cylindrical transform can be applied only to cylindrical faces.

Notes

  • This constraint can be used to simulate torsion but only for cylindrical bars or parts containing such bars used to transmit torque.
  • The constraint uses the *TRANSFORM card in CalculiX.