FEM ConstraintTransform/ru
|
|
| Расположение в меню |
|---|
| Model → Geometrical constraints → Constraint transform |
| Верстаки |
| FEM |
| Быстрые клавиши |
| Нет |
| Представлено в версии |
| - |
| См. также |
| FEM Constraint plane rotation |
Описание
Transforms the coordinate system of a face to a user-defined coordinate system - rectangular or cylindrical. This coordinate system affects the boundary condition and load definitions. For example, you can use it to fix the displacements in the normal direction of an inclined face or apply boundary conditions in radial and tangential directions for cylindrical faces. Just select the proper component of the displacement boundary condition.
Применение
- Apply displacement boundary condition or force load to a face first.
- There are several ways to invoke the command:
- Press the
Local Coordinate System button.
- Select the Model → Geometrical Analysis Features →
Local Coordinate System option from the menu.
- Press the
- Select rectangular or cylindrical transform. The former can be applied to any face, the latter is available only for the cylindrical faces.
- Select a face to which the displacement boundary condition or force load was previously applied. Press the Add button. introduced in 1.1: To remove a face from the selection, select it and press the Remove button.
- For rectangular transform, specify a rotation about each of the three axes. Arrows displayed on the face represent the new directions (X - red, Y - green and Z - blue).
Rectangular local coordinate system defined for an inclined face. Long thin arrows indicate the global coordinate system, short thick ones represent the local one. Displacement boundary condition with fixed Z displacement (blue axis - perpendicular to the face in the local coordinate system) was applied first (hidden in the picture). This simulates roller support with the part being able to slide along that face.
Cylindrical transformation for a cylindrical face. Global X direction (red) always becomes the local radial direction. Fixing it via displacement boundary condition prevents radial expansion but not rotation around the hole. That would require fixing the tangential direction (Y in global axes). The third direction (global Z) is axial.
Cylindrical transformation for a cylindrical face. Force (purple arrows) applied in the global Y direction becomes force applied in the tangential direction - torque. The shaft is twisted.
Limitations
- Cylindrical transform can be applied only to cylindrical faces.
Notes
- This feature can be used to simulate torsion but only for cylindrical bars or parts containing such bars used to transmit torque.
- The feature uses the *TRANSFORM card in CalculiX.
- Materials: Solid Material, Fluid Material, Non-Linear Mechanical Material, Reinforced Material (Concrete); Material Editor
- Element Geometry: Beam Cross Section, Beam Rotation, Shell Plate Thickness, Fluid Section for 1D Flow
- Electromagnetic Boundary Conditions: Electrostatic Potential Boundary Condition, Current Density Boundary Condition, Magnetization Boundary Condition, Electric Charge Density
- Fluid Boundary Conditions: Initial Flow Velocity Condition, Initial Pressure Condition, Flow Velocity Boundary Condition
- Geometrical Analysis Features: Plane Multi-Point Constraint, Section Print Feature, Local Coordinate System
- Mechanical Boundary Conditions and Loads: Fixed Boundary Condition, Rigid Body Constraint, Displacement Boundary Condition, Contact Constraint, Tie Constraint, Spring Boundary Condition, Force Load, Pressure Load, Centrifugal Load, Gravity Load
- Thermal Boundary Conditions and Loads: Initial Temperature, Heat Flux Load, Temperature Boundary Condition, Body Heat Source
- Overwrite Constants: Constant Vacuum Permittivity
- Mesh: Mesh From Shape by Netgen, Mesh From Shape by Gmsh, Mesh Boundary Layer, Mesh Refinement, Mesh Group, Erase Elements, FEM Mesh to Mesh
- Solve: Solver CalculiX, Solver Elmer, Solver Mystran, Solver Z88; Mechanical Equations: Elasticity Equation, Deformation Equation; Electromagnetic Equations: Electrostatic Equation, Electricforce Equation, Magnetodynamic Equation, Magnetodynamic 2D Equation, Static Current Equation; Flow Equation, Flux Equation, Heat Equation, Solver Job Control, Run Solver
- Results: Purge Results, Show Result, Apply Changes to Pipeline, Post Pipeline From Result, Pipeline Branch, Warp Filter, Scalar Clip Filter, Function Cut Filter, Region Clip Filter, Contours Filter, Glyph Filter, Line Clip Filter, Stress Linearization Plot, Data at Point Clip Filter, Calculator Filter; Filter Functions: Plane, Sphere, Cylinder, Box; Data Visualizations: Create Lineplot, Create Histogram, Create Table
- Utilities: Clipping Plane on Face, Remove All Clipping Planes, FEM Examples; Clear FEM Mesh, Display Mesh Info
- Additional: Preferences; FEM Install, FEM Mesh, FEM Solver, FEM CalculiX, FEM Concrete; FEM Element Types
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework