MES: Wiązanie MPC typu płaszczyzna

From FreeCAD Documentation
Revision as of 07:13, 3 April 2022 by Kaktus (talk | contribs) (Created page with "{{GuiCommand/pl |Name=FEM ConstraintPlaneRotation |Name/pl=MES: Zdefiniuj obrót w płaszczyźnie |MenuLocation=Model → Wiązania geometryczne → Zdefiniuj obrót w płaszc...")

MES: Zdefiniuj obrót w płaszczyźnie

Lokalizacja w menu
Model → Wiązania geometryczne → Zdefiniuj obrót w płaszczyźnie
Środowisko pracy
środowisko pracy MES
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Zdefiniuj odkształcenia

Opis

Creates a FEM constraint for keeping the nodes in a planar surface in the same plane.

Użycie

  1. There are several ways to invoke the command:
    • Press the FEM ConstraintPlaneRotation button.
    • Select the Model → Geometrical Constraints → Constraint plane rotation option from the menu.
  2. In the 3D view select the object the constraint should be applied to, which can be a face.

Ograniczenia

  1. Plane rotation constraint can only be applied to a single planar face.
  2. When a plane rotation constraint is applied to the same face as a displacement/fixed constraint, the displacement/fixed constraint takes preference.

Uwagi

  1. The constraint uses the *MPC card in CalculiX. The card is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node220.html