CAM Engrave/pl: Difference between revisions

From FreeCAD Documentation
m (FuzzyBot moved page Path Engrave/pl to CAM Engrave/pl without leaving a redirect: Part of translatable page "Path Engrave")
(Updating to match new version of source page)
 
Line 3: Line 3:


{{Docnav
{{Docnav
|[[Path_Slot|Slot]]
|[[CAM_Slot|Slot]]
|[[Path_Deburr|Deburr]]
|[[CAM_Deburr|Deburr]]
|[[Path_Workbench|Path]]
|[[CAM_Workbench|CAM]]
|IconL=Path_Slot.svg
|IconL=CAM_Slot.svg
|IconR=Path_Deburr.svg
|IconR=CAM_Deburr.svg
|IconC=Workbench_Path.svg
|IconC=Workbench_CAM.svg
}}
}}


{{GuiCommand
{{GuiCommand
|Name=Path Engrave
|Name=CAM Engrave
|MenuLocation=Path → Engrave
|MenuLocation=CAM → Engrave
|Workbenches=[[Path_Workbench|Path]]
|Workbenches=[[CAM_Workbench|CAM]]
}}
}}


==Description==
==Description==


The [[Image:Path_Engrave.svg|24px]] [[Path_Engrave|Engrave]] tool is primarily for engraving a [[Image:Draft_ShapeString.svg|24px]] [[Draft_ShapeString|Draft ShapeString]] onto a part. However, it may be useful for other kinds of 2D.
The [[Image:CAM_Engrave.svg|24px]] [[CAM_Engrave|Engrave]] tool is primarily for engraving a [[Image:Draft_ShapeString.svg|24px]] [[Draft_ShapeString|Draft ShapeString]] onto a part. However, it may be useful for other kinds of 2D.


==Usage==
==Usage==
Line 83: Line 83:


{{Docnav
{{Docnav
|[[Path_Slot|Slot]]
|[[CAM_Slot|Slot]]
|[[Path_Deburr|Deburr]]
|[[CAM_Deburr|Deburr]]
|[[Path_Workbench|Path]]
|[[CAM_Workbench|CAM]]
|IconL=Path_Slot.svg
|IconL=CAM_Slot.svg
|IconR=Path_Deburr.svg
|IconR=CAM_Deburr.svg
|IconC=Workbench_Path.svg
|IconC=Workbench_CAM.svg
}}
}}


{{Path_Tools_navi{{#translation:}}}}
{{CAM_Tools_navi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}

Latest revision as of 14:13, 26 March 2024

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

CAM Engrave

Menu location
CAM → Engrave
Workbenches
CAM
Default shortcut
None
Introduced in version
-
See also
None

Description

The Engrave tool is primarily for engraving a Draft ShapeString onto a part. However, it may be useful for other kinds of 2D.

Usage

Empty

Options

Empty

Properties

Data

Base

  • DANEPlacement:
  • DANELabel: User name of the object (UTF-8)

Depth

  • DANEClearance Height: The height needed to clear clamps and obstructions
  • DANEFinal Depth: Final Depth of Tool- lowest value in Z
  • DANESafe Height: The above which Rapid motions are allowed.
  • DANEStart Depth: Starting Depth of Tool- first cut depth in Z
  • DANEStep Down: Incremental Step Down of Tool

Path

  • DANEActive: Make False, to prevent operation from generating code
  • DANEBase: The base geometry for this operation
  • DANEComment: An optional comment for this operation
  • DANECoolant Mode: Coolant mode for this operation
  • DANECycle Time: Estimated cycle time for this operation
  • DANEStart Vertex: The vertex index to start the path from
  • DANETool Controller: The tool controller that will be used to calculate the path
  • DANEUser Label: User assigned label

Hidden

  • DANEBase Object:
  • DANEBase Shapes:
  • DANEExpression Engine:
  • DANELabel2:
  • DANEPath:
  • DANEProxy:
  • DANEVisibility:

View

Empty

Scripting

See also: FreeCAD Scripting Basics.

Example:

#Place code example here.