Rysunek Techniczny: Rozszerzenie Seria wymiarów kaskadowych ukośnie

From FreeCAD Documentation
Revision as of 18:29, 23 July 2023 by Kaktus (talk | contribs) (Created page with "{{GuiCommand/pl |Name=TechDraw ExtensionCreateObliqueCoordDimension |Name/pl=Rysunek Techniczny: Rozszerzenie Seria wymiarów kaskadowych ukośnie |MenuLocation=Rysunek Techniczny → Rozszerzenia: Wymiary → Seria wymiarów ukośnie |Workbenches=Rysunek Techniczny |Shortcut= |Version=0.20 |SeeAlso=Seria wymiarów kaskadowych poziomo, TechDraw_ExtensionCreateVertCoordDimension/pl|Seria wymiar...")
Other languages:

Rysunek Techniczny: Rozszerzenie Seria wymiarów kaskadowych ukośnie

Lokalizacja w menu
Rysunek Techniczny → Rozszerzenia: Wymiary → Seria wymiarów ukośnie
Środowisko pracy
Rysunek Techniczny
Domyślny skrót
brak
Wprowadzono w wersji
0.20
Zobacz także
Seria wymiarów kaskadowych poziomo, Seria wymiarów kaskadowych pionowo

Opis

The TechDraw ExtensionCreateObliqueCoordDimension tool creates oblique coordinate dimensions: multiple evenly spaced dimensions starting from the same baseline.

On the right the created dimensions

Usage

  1. Optionally specify the cascade spacing with the TechDraw ExtensionSelectLineAttributes tool.
  2. Select three or more vertexes.
  3. The selection order of the first two vertexes determines the position of the baseline. If the vertex that is selected first is to the left of the second, the baseline is created at the leftmost vertex, else it is created at the rightmost vertex.
  4. The first two vertexes also define the direction.
  5. There are several ways to invoke the tool:
  6. Coordinate dimensions with centered dimension texts are created.