FEM ConstraintRigidBody/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Opis==")
(Created page with "Definiuje wiązanie ciała sztywnego dostępne w CalculiX, które wiąże ruch węzłów należących do wskazanego obiektu geometrycznego z ruchem węzła referencyjnego, którego położenie jest definiowane przez użytkownika. W praktyce, można z tego skorzystać do przyłożenia warunków brzegowych lub obciążeń, które będą propagowane na wybraną ścianę. Ponieważ węzeł referencyjny ma obrotowe stopnie swobody, można w ten sposób przyłożyć na dowoln...")
Line 23: Line 23:




Definiuje wiązanie ciała sztywnego dostępne w CalculiX, które wiąże ruch węzłów należących do wskazanego obiektu geometrycznego z ruchem węzła referencyjnego, którego położenie jest definiowane przez użytkownika. W praktyce, można z tego skorzystać do przyłożenia warunków brzegowych lub obciążeń, które będą propagowane na wybraną ścianę. Ponieważ węzeł referencyjny ma obrotowe stopnie swobody, można w ten sposób przyłożyć na dowolną ścianę obciążenie momentem lub warunek brzegowy rotacji. Położenie węzła referencyjnego można zdefiniować, jeśli jest on odsunięty od obiektu geometrycznego to przykłada się w ten sposób siłę działającą na ramieniu.
<div lang="en" dir="ltr" class="mw-content-ltr">
Defines the CalculiX's rigid body constraint that constrains the motion of the nodes of a selected geometrical entity to the motion of a reference node whose location is defined by the user. In practice, this can be used to apply a boundary condition or load that will be propagated to the selected face. Since the reference node has rotational degrees of freedom, it's possible to apply a moment load or a rotational boundary condition to any face this way. The location of the reference node can be selected, if it's offset from a geometrical entity, a remote load (a force acting on a lever) can be applied.
</div>


<div lang="en" dir="ltr" class="mw-content-ltr">
<div lang="en" dir="ltr" class="mw-content-ltr">

Revision as of 12:28, 22 May 2024

Other languages:


FEM ConstraintRigidBody

Menu location
Model → Warunki brzegowe i obciążenia mechaniczne → Wiązanie ciała sztywnego
Workbenches
MES
Default shortcut
None
Introduced in version
1.0
See also
MES Warunek brzegowy przemieszczenia

Opis

Definiuje wiązanie ciała sztywnego dostępne w CalculiX, które wiąże ruch węzłów należących do wskazanego obiektu geometrycznego z ruchem węzła referencyjnego, którego położenie jest definiowane przez użytkownika. W praktyce, można z tego skorzystać do przyłożenia warunków brzegowych lub obciążeń, które będą propagowane na wybraną ścianę. Ponieważ węzeł referencyjny ma obrotowe stopnie swobody, można w ten sposób przyłożyć na dowolną ścianę obciążenie momentem lub warunek brzegowy rotacji. Położenie węzła referencyjnego można zdefiniować, jeśli jest on odsunięty od obiektu geometrycznego to przykłada się w ten sposób siłę działającą na ramieniu.

Usage


  1. There are several ways to invoke the command:
    • Press the Constraint rigid body button.
    • Select the Model → Mechanical boundary conditions and loads → Constraint rigid body option from the menu.
  2. In the 3D view select the geometrical element(s) (vertices, edges or faces but not a mix of them) to which the constraint should be applied.
  3. Specify the coordinates of the reference node. After closing the task panel, a spherical symbol will show this location.
  4. Choose modes for the 3 translational and 3 rotational degrees of freedom (DOFs):
    • Free - default, no boundary condition or load on that DOF
    • Constraint - displacement/rotation boundary condition with a specified value (default: 0 = fixed) on that DOF - for rotation, one needs to set an axis (X, Y or Z) and specify the Angle
    • Load - force/moment load with a specified value on that DOF

Limitations


  • Currently, the moment units can be somewhat confusing. To apply 1 N*m, one needs to set 1 J in the input field (those units are equivalent).
  • The feature can be applied only to vertices, edges and faces for now, support for solids (to make whole volumes/parts rigid) should follow in the future.
  • The selected object is made rigid. To apply loads in a more flexible way, one would need to use CalculiX's distributing coupling constraints which are currently unsupported.

Notes

  • This constraint is the standard way of applying torque to arbitrary parts. The other options are the Local coordinate system (only for cylindrical faces) or a pair of forces but the rigid body constraint should be sufficient in pretty much all the cases.
  • No other constraints/boundary conditions should be applied to the nodes involved in a rigid body constraint.
  • When applying this constraint to a vertex or an edge, one should set a proper rotational DOF (in the case of an edge, the one that will prevent the rotation about it) to zero.
  • This feature uses the *RIGID BODY card in CalculiX.