FEM MeshNetgenFromShape/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav |Zdefiniuj przenikalność elektryczną próżni |Siatka MES z kształtu przy pomocy generatora Gmsh |MES |IconL=FEM_ConstantVacuumPermittivity.svg |IconR=FEM_MeshGmshFromShape.svg |IconC=Workbench_FEM.svg }}")
(Created page with "{{GuiCommand/pl |Name=FEM MeshNetgenFromShape |Name/pl=Siatka MES z kształtu przy pomocy generatora Netgen |MenuLocation=Siatka → Siatka MES z kształtu przy pomocy generatora Netgen |Workbenches=MES |SeeAlso=Poradniki MES }}")
Line 11: Line 11:
}}
}}


{{GuiCommand
{{GuiCommand/pl
|Name=FEM MeshNetgenFromShape
|Name=FEM MeshNetgenFromShape
|MenuLocation=Mesh FEM mesh from shape by Netgen
|Name/pl=Siatka MES z kształtu przy pomocy generatora Netgen
|MenuLocation=Siatka → Siatka MES z kształtu przy pomocy generatora Netgen
|Workbenches=[[FEM_Workbench|FEM]]
|Workbenches=[[FEM_Workbench/pl|MES]]
|SeeAlso=[[FEM_tutorial|FEM tutorial]]
|SeeAlso=[[FEM_tutorial/pl|Poradniki MES]]
}}
}}



Revision as of 22:34, 19 November 2023

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Siatka MES z kształtu przy pomocy generatora Netgen

Lokalizacja w menu
Siatka → Siatka MES z kształtu przy pomocy generatora Netgen
Środowisko pracy
MES
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Poradniki MES

Description

For a finite element analysis the geometry needs to be discretized into a FEM Mesh. This command uses Netgen (which needs to be installed on the system) for calculating the mesh.

Depending on your operating system and your installation package Netgen might be bundled with FreeCAD or not. For further information see FEM Install.

Usage

  1. Select the shape you want to analyze. For a volume, this needs to be a solid or compsolid. A compsolid is necessary if your part is made from multiple materials. (A compsolid can be created with the Part BooleanFragments command.)
  2. Optionally, edit the parameters.
  3. Click the Apply button to make a mesh, or OK button to make a mesh and close the dialogue.

Properties

  • DANEMax. Size: Maximum size of the element in mm.
  • DANESecond order: Second order elements contain more nodes per element. Usually, it is enough to use rougher mesh to obtain same solution precision as with the first order elements,
    • true (default); second order elements,
    • false; first order elements.
  • DANEFineness: Defines how fine the mesh should be.
  • DANEGrowth Rate: Defines how much adjacent elements can differ in size.
  • DANENb. Segs per Edge: Defines the minimum number of mesh segments per edge.
  • DANENb. Segs per Radius: Defines the minimum number of mesh segments per radius.
  • DANEOptimize:
    • true (default); applies optimization algorithm to improve mesh quality,
    • false;