FEM EquationFlow/pl: Difference between revisions
(Updating to match new version of source page) |
No edit summary |
||
Line 2: | Line 2: | ||
{{Docnav/pl |
{{Docnav/pl |
||
|[[FEM_EquationMagnetodynamic2D/pl|Równanie |
|[[FEM_EquationMagnetodynamic2D/pl|Równanie magnetodynamiczne 2D]] |
||
|[[FEM_EquationFlux/pl|Równanie strumienia]] |
|[[FEM_EquationFlux/pl|Równanie strumienia]] |
||
|[[FEM_Workbench/pl| |
|[[FEM_Workbench/pl|środowisko pracy MES]] |
||
|IconL=FEM_EquationMagnetodynamic2D.svg |
|IconL=FEM_EquationMagnetodynamic2D.svg |
||
|IconR=FEM_EquationFlux.svg |
|IconR=FEM_EquationFlux.svg |
Revision as of 13:06, 22 November 2023
FEM EquationFlow |
Menu location |
---|
Solwer → Równanie przepływu |
Workbenches |
MES |
Default shortcut |
None |
Introduced in version |
0.17 |
See also |
None |
This equation calculate viscous fluid flows using the Navier-Stokes equations.
For info about the math of the equation, see the Elmer models manual, section Navier-Stokes Equations.
Usage
- After adding an Elmer solver as described here, select it in the tree view.
- Now either use the toolbar button or the menu Solve → Flow equation.
- Change the equation's solver settings or the general solver settings if necessary.
Solver Settings
For the general solver settings, see the Elmer solver settings.
The flow equation provides these special settings:
- DANEDiv Discretization: To be set to true for incompressible flow for more stable discretization when the Reynolds number increases.
- DANEFlow Model: The flow model that should be used. The default Full includes convection and time derivative terms in the model. No convection switches off the convection terms and the Stokes model switches off the convection terms and the (explicit) time derivative terms.
- DANEGradp Discretization: If set to true pressure Dirichlet boundary conditions can be used. Also the mass flux is available as a natural boundary condition.
- DANEVariable: Optional only for calculations in 2D: You can change the default of 3 to 2.
Note: In this case none of the flow velocity constraints can have a specified z-component.
Equation:
- DANEConvection: The type of convection to be used in the Heat equation.
Note: For thermal flows it must be set to Computed (the default). - DANEMagnetic Induction: If set to true the magnetic induction equation will be solved along with the Navier-Stokes equations.
Notes for Convergence
If the solver results do not converge, you can try these things (in the given order):
- Reduce the DANERelaxation Factor, see the nonlinear system settings.
- Increase the value for DANENonlinear Newton After Iterations, see the nonlinear system settings.
- Reduce the number of CPU cores used, see the FEM preferences.
- Increase the mesh density (make it more fine).
Analysis Feature Information
The flow equation takes the following analysis features into account if they are set:
- Flow velocity boundary condition
- Initial flow velocity condition
- Pressure load
- Initial pressure condition (introduced in version 0.21)
Notes
- Except for calculations in 2D, for all above constraints it is important that they act on a face or body. Constraints for 3D set to lines or vertices are not recognized by the Elmer solver.
- Since Pressure load can only be set to faces, pressure loads cannot be used for calculations in 2D.
- If there is no Pressure load set, Initial pressure condition will only be taken into account if DANEGradp Discretization is set to true.
Results
The results are the velocity in and the pressure in . If there is no Initial pressure condition and Pressure load given, the resulting pressure will be relative not absolute. Since pressure must act on a face, absolute pressure results cannot be obtained in 2D simulations.
- Materiał: Bryła, Ciecz, Nieliniowy materiał mechaniczny, Materiał zbrojony (beton), Edytor materiału
- Geometria elementu: Geometria elementu, Obrót w okół osi, Geometria elementu 2D, Element przepływu
Wiązania
- Elektromagnetyczne: Potencjał elektryczny, Gęstość prądu, Magnetyzacja
- Geometryczne: Obrót w płaszczyźnie, Zapis wyników z przekroju, Zdefiniuj odkształcenie
- Mechaniczne: Zdefiniuj przytwierdzenie, Zdefiniuj przemieszczenie, Zdefiniuj kontakt, Zdefiniuj powiązanie, Wiązanie sprężyny, Zdefiniuj siłę, Zdefiniuj obciążenie ciśnieniem, Zdefiniuj siłę odśrodkową, Zdefiniuj obciążenie ciężarem własnym
- Termiczne: Warunek początkowy temperatury, Zdefiniuj strumień ciepła, Zdefiniuj temperaturę, Zdefiniuj objętościowe źródło ciepła
- Zmieniające wiązania: Zdefiniuj przenikalność elektryczną próżni
- Siatki: Siatka Netgen, Siatka GMSH, Warstwa graniczna siatki, Obszar siatki, Grupa siatki, Utwórz zestaw węzłów, Siatka MES na obiekt środowiska Siatka
- Solver: Narzędzia CalculiX, Elmer, Mystran, Z88; Równania: Elastyczności, Elektrostatyczne, Siły elektrostatycznej, Magnetodynamiczne, RMagnetodynamiczne 2D, Przepływu, Strumienia, Ciepła; Solver: Kontrola pracy solvera, Uruchom solver
- Wyniki: Oczyszczanie z wyników, Prezentacja wyników; Postprocessing: Zastosuj zmiany, Prezentacja graficzna, Filtr rozpraszający, Skalarny filtr obcinający, Filtr odcięcia funkcji, Filtr odcięcia obszaru, Filtr konturów, Filtr danych wzdłuż linii, Wykres liniowości naprężeń, Filtr obcinania danych w punkcie, Utwórz funkcję, Filtr funkcji płaszczyzny, Filtr funkcji sfery, Filtr funkcji walca, Filtr funkcji prostopadłościanu
- Dodatkowe: Konfiguracja, Instalacja środowiska MES, Siatka, FEM Solver, CalculiX, Beton, Rodzaje elementów
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework