MES: Warunek brzegowy magnetyzacji

From FreeCAD Documentation
Revision as of 17:25, 18 November 2023 by NewJoker (talk | contribs) (Created page with "==Opcje==")
Other languages:

FEM ConstraintMagnetization

Lokalizacja w menu
Model → Warunki brzegowe elektromagnetyczne → Warunek brzegowy magnetyzacji
Środowisko pracy
MES
Domyślny skrót
brak
Wprowadzono w wersji
0.21
Zobacz także
Równanie magnetodynamiczne, Równanie magnetodynamiczne 2D

Opis

Tworzy warunek brzegowy MES magnetyzacji. Używane z równaniem magnetodynamicznym i magnetodynamicznym 2D.

Użycie

  1. Wciśnij przycisk Warunek brzegowy magnetyzacji lub użyj opcji Model → Warunki brzegowe elektromagnetyczne → Warunek brzegowy magnetyzacji z menu.
  2. W widoku 3D wybierz obiekt, do którego ma być przypisany warunek brzegowy.
  3. Wciśnij przycisk Dodaj.

Opcje

  • Magnetization_*_1: The real/imaginary part of the magnetization in x-direction in A/m.
    For other coordinate systems than Cartesian 3D, this will be the first coordinate of the system instead of x.
  • Magnetization_*_2: The real/imaginary part of the magnetization in y-direction in A/m.
    For other coordinate systems than Cartesian 3D, this will be the second coordinate of the system instead of y.
  • Magnetization_*_3: The real/imaginary part of the magnetization in z-direction in A/m.
    For other coordinate systems than Cartesian 3D, this will be the third coordinate of the system instead of z. If the coordinate system has no third coordinate, this setting will be ignored.
  • Magnetization_*_*_Disabled: Whether the corresponding parameter is disabled (assumed as unknown by the solver).