Atelierul Draft (Desen 2D)

From FreeCAD Documentation
Revision as of 22:22, 24 August 2021 by FuzzyBot (talk | contribs) (FuzzyBot moved page Draft Module/ro to Draft Workbench/ro without leaving a redirect: Part of translatable page "Draft Module")
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.
Draft workbench icon

Introduction

Introducere

Atelierul Draft vă permite desenarea rapidă a unor obiecte bidimensionale în documentul curent şi oferă mai multe unelte pentru modificarea lor ulterioară. De asemenea, oferă instrumente pentru a defini un plan de lucru, o rețea și un sistem de ancorare pentru a controla precis poziția geometriei dvs.

Obiectele create 2D pot fi folosite pentru redactarea generală într-un mod similar cu Inkscape sau Autocad. Aceste forme 2D pot fi de asemenea utilizate ca componente de bază ale obiectelor 3D create cu alte ateliere de lucru, de exemplu, Part și Arch Workbench. Este, de asemenea, posibilă transformarea de obiecte Draft în Sketches, ceea ce înseamnă că formele pot fi de asemenea utilizate cu PartDesign Workbench pentru crearea de corpuri solide.

FreeCAD este în primul rând o aplicație de modelare 3D și, prin urmare, instrumentele sale 2D nu sunt la fel de avansate ca în cazul altor programe de desenare. Dacă obiectivul dvs. principal este producerea de desene complexe 2D și fișiere DXF și nu aveți nevoie de modelare 3D, vă recomandăm să luați în considerare un program software dedicat pentru redactarea tehnică, cum ar fi LibreCAD, QCad, TurboCad, ș.a.m.d.

Draft Workbench Example

Desenarea obiectelor

Aceste unelte se folosesc la crearea obiectelor.

  • Linie din 2 puncte: Trasează un segment de linie definit prin 2 puncte.
  • Fir/Poliline: Desenează o linie formată din mai multe segmente.
  • Cerc: Trasează un cerc definit prin centru şi rază.
  • Arc: Desenează un arc cu definit prin centru, rază, unghiul iniţial şi cel final.
  • Ellipse: Desenează o elipsă definită prin două puncte, definind colțuri diagonale ale unei casete rectangulare în care se va încadra elipsa
  • Poligon: Desenează un poligon regulat definit prin centrul, rază și numărul de laturi.
  • Rectangle: Trasează un dreptunghi folosind ca repere capetele diagonalei.
  • Text: Adaugă o casetă text cu mai multe linii de scriere.
  • Dimensiuni: Introduce o dimensiune de cotare.
  • BSpline: Trasează o curbă (B-Spline) folosind o serie de puncte.
  • Punct: Inserează un punct.
  • ShapeString: Instrumentul ShapeString introduce o formă compusă reprezentând un șir de text într-un punct dat în documentul curent
  • Facebinder:Creează un obiect nou din fațetele selectate pe obiectele existente
  • Bezier Curve: Desenează o curbă Bezier definită printr-o serie de puncte
  • Label: Plasează o etichetă cu o săgeată care indică un element selectat introduced in version 0.17

Annotation objects

Modificarea obiectelor

Aceste unelte modifică obiectele existente. Ţinta lor sunt obiectele selectate, iar dacă nu exista nici un obiect selectat veţi fi invitat să selectaţi unul.

Multe instrumente de operare (mutare, rotire, matrice etc.) lucrează și pe obiecte solide (Part, PartDesign, Arch, etc.).

  • Muta: Mută obiectele dintr-o locaţie în alta.
  • Rotire: Roteşte obiectele de la un unghi iniţial la un unghi final.
  • Expandare: Mută segmentele unui obiect la o anumită distanţă constantă.
  • Taie/Extinde (Trimex): Taie sau extinde un obiect.
  • Unire: Uneşte obiectele intr-un singur obiect mai complex.
  • Explodare: Sparge un obiect complex în părţi (obiecte mai simple).
  • Scalare: Scalează obiectele selectate în jurul punctului de bază.
  • Desenare: Transferă şi transcrie obiectele selectate pe o foaie de desen.
  • Editare: Editează obiectul selectat.
  • Polilinie in BSpline: Converteşte o polilinie într-o curbă (BSpline) şi viceversa.
  • Adauga punct: Inserează un punct intr-o polilinie sau curbă (BSpline).
  • Sterge point: Şterge un punct dintr-o polilinie sau curbă (BSpline).
  • Vizualizare 2D a formei: Creează un obiect 2D care reprezintă proiecţia unui obiect 3D.
  • Ciorna in schita: Converteşte un obiect 2D (Draft) în schiţă şi viceversa.
  • Multimi: Creează o matrice de simetrie polară sau rectangulară multiplicând obiectele selectate.
  • Path Array: Creează o serie de obiecte prin plasarea copiilor de-a lungul unei traiectorii
  • Clonare: Clonează obiectele selectate.
  • Mirror: Simetrizează obiectele selectate
  • Stretch: Extinde obiectele selectateintroduced in version 0.17
  • Join: joins lines together into a single wire.
  • Split: splits a wire into two at a point.
  • Upgrade: upgrades objects into a higher-level object.
  • Downgrade: downgrades objects into lower-level objects.
  • Shape 2D View: creates a 2D object which is a flattened 2D view of a 3D object.

Draft Tray

The Draft Tray allows selecting the working plane, defining style settings, toggling construction mode, and specifying the active layer or group.

Its tools are also available in the Draft → Utilities menu:

Draft annotation scale widget

With the Draft annotation scale widget the Draft annotation scale can be specified. introduced in version 0.19

Draft snap widget

The Draft snap widget can be used as an alternative for the Draft Snap toolbar. introduced in version 0.19

Draft Snap toolbar

The Draft Snap toolbar allows selecting the active snap options. The buttons belonging to active options stay depressed. For general information about snapping see: Draft Snap.

  • Toggle snap: toggles object snapping globally on or off.
  • Endpoint: snaps to the endpoints of line, arc and spline segments.
  • Midpoint: snaps to the middle point of line and arc segments.
  • Center: snaps to the center point of circles, arcs and faces, WP proxies and Building parts
  • Angle: snaps to the special cardinal points of circles and arcs, at 45° and 90°.
  • Intersection: snaps to the intersection of two line or arc segments. Hover the mouse over the two desired objects to activate their intersection snaps.
  • Perpendicular: on line and arc segments, snaps perpendicularly to the latest point.
  • Extension: snaps on an imaginary line that extends beyond the endpoints of line segments. Hover the mouse over the desired object to activate its extension snap.
  • Parallel: snaps on an imaginary line parallel to a line segment. Hover the mouse over the desired object to activate its parallel snap.
  • Special: snaps on special points defined by the object.
  • Near: snaps to the closest point or edge on the nearest object.
  • Ortho: snaps on imaginary lines that cross the last point, and extend at 0°, 45° and 90°.
  • Grid: snaps to the intersections of the grid lines, if the grid is visible.
  • Working plane: always places the snapped point on the current working plane, even if you snap to a point outside that working plane.
  • Dimensions: shows temporary X and Y dimensions while snapping.
  • Toggle grid: toggles the visibility of the grid on or off.

Utilitare

Additional tools

O serie de instrumente suplimentare sunt oferite de un meniu Draft → Utilities, sau cu clic-dreapta în meniul contextual, în funcţie de obiectele selectate:

Caracteristici suplimentare

introduceți coordonatele în loc să faceți clic pe vizualizarea 3D pentru a defini un nou punct.

limitați pointerul la mișcări orizontale sau verticale în raport cu un punct anterior.

plasați noi puncte pe locuri speciale pe obiecte existente sau pe grilă.

Tree view context menu

The following additional options are available in the Tree view context menu:

Selection options

If there is a selection the context menu contains one additional sub-menu:

  • Utilities: a subset of the tools available in the main Draft Utilities menu.

Wire options

For a Draft Wire, Draft BSpline, Draft CubicBezCurve and Draft BezCurve this additional option is available:

  • Flatten this wire: flattens the wire based on its internal geometry. This option currently does not work properly.

Layer container options

For a Draft LayerContainer these additional options are available:

  • Merge layer duplicates: this option currently does not work.

Layer options

For a Draft Layer these additional options are available:

Working plane proxy options

For a Draft WorkingPlaneProxy these additional options are available:

  • Write objects state: updates the visibility state of objects stored in the working plane proxy.

3D view context menu

The following additional options are available in the 3D view context menu:

No-selection options

If there is no selection the context menu contains one additional sub-menu:

  • Utilities: a subset of the tools available in the main Draft Utilities menu.

Selection options

If there is a selection the context menu contains two additional sub-menus:

Obsolete tools

These commands are obsolete but still available:

These 3D view context menu options are still available when the Draft Wire, Draft BSpline, Draft CubicBezCurve or Draft BezCurve command is active but will be removed in the near future:

Preferințe

  • Preferences: Preferințe disponibile în Atelierul Draft Workbench.
  • Import-Export Preferences: preferințele disponibile pentru importul și exportul în diferite formate de fișiere.

Formate de fişiere

Atelierul Desen 2D (Draft) înzestrează FreeCAD cu importul şi exportul următoarele formate de fişiere:

Install importers

Unit tests

See also: Test Workbench.

To run the unit tests of the workbench execute the following from the operating system terminal.

freecad -t TestDraft

Script

Instrumentele de proiectare pot fi utilizate în macros și din consola Python utilizând API-ul de proiect.

The workbench includes a module to create samples of all objects in a new document. introduced in version 0.19

Use this to test that all objects are produced correctly.

import drafttests.draft_test_objects as dto
doc = dto.create_test_file()

Inspecting the code of this module is useful to understand how to use the programming interface.

$INSTALLDIR/Mod/Draft/drafttests/draft_test_objects.py

Where $INSTALLDIR is the toplevel directory where the software was installed; for example, in Linux it may be /usr/share/freecad.

Test objects for the Draft Workbench.