Tutoriale
Această pagină prezintă o selecție de tutoriale scrise de înaltă calitae. O listă completă și nesortată de tutoriale puteți găsi la : Category:Tutorials.
If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.
Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.
See also video tutorials and books.
Architectura și Construcții Civile și industriale
Arch tutorial
Basele medelării arhitecturale.Arch panel tutorial
Modelarea unui acoperiș în două ape la o casă mică.BIM modeling
Cum se face un model de casă mică și produce planul.
Modelarea Pieselor
FreeCAD furnizează două fluxuri de lucru la modelarea pieselor: combinarea obiectelor (o metodă numită constructive solid geometry (CSG)) utilizând Part workbench, sau utilizând metoda de editare feature cu Atelierul PartDesign PartDesign workbench. Vă rugăm să notați că PartDesign work flow s-a schimbat considerabil de la v0.17 încoace: unele dintre tutoriale trebuie updatate.
- combinarea obiectelor, o metodă numită geometrie solidă constructivă (CSG) utilizând Workbench part și
* folosind modelarea parametrică și editarea caracteristică cu PartDesign workbench.
Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.
Creating a simple part with PartDesign
An intro to v0.17 PartDesign workflowBasic Part Design Tutorial 017
Model a simple part using a feature editing methodology (updated for version 0.17)Model a Toothbrush Head Stand
in PartDesign v0.16Modeling for product design
Modeling a Lego block v0.16Traditional modeling, the CSG way
Model a table using a simple CSG work flow.Draft ShapeString tutorial
Create engraved text on a solid.Create a Whiffle Ball
from Part primitives.Basic modeling tutorial
Create an iron angle in 2 simple methods.Creating a simple part with Draft and Part Workbench
An introduction to modeling solids with Draft Workbench by creating a 2d profile in draft.Creating a simple part with PartDesign (v0.17)
An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object.Basic Part Design Tutorial (v0.17)
Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror.Basic Part Design Tutorial 019 (v0.19 or above)
An updated version of the previous tutorial that creates the same model using techniques that avoid the topological naming problem.Model an electric toothbrush head stand (v0.16 or above)
Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft.Modeling for product design (v0.16)
Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly.Traditional modeling, the CSG way
Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them.Draft ShapeString tutorial (v0.19)
Create engraved text on a solid: extrude a shapestring to make it solid, then use a boolean cut to carve it from another solid.Create a wiffle ball (v0.19)
Use solid primitives, like cubes and cylinders, and boolean operations, like union and cut, to create a hollowed ball.Basic modeling tutorial
Create an iron angle by two methods: using solid primitives, and boolean operations (CSG); and by extruding a planar profile.Aeroplane tutorial
Understand placements in FreeCAD by creating a simple aeroplane model. Then learn about rotation angles, yaw (Z), pitch (Y), and roll (X).Thread for screw tutorial (v0.19)
Understand how to create threads with several techniques that include use of the tools Part Helix, PartDesign AdditivePipe, Part Sweep, Part Fuse, and Part Cut.
The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:
- freecad-dice, model a die with six faces, and optionally 3D print it.
- freecad-headphone-tidy, model a spool to organize and store earphones, and optionally 3D print it.
- freecad-chess-set, model and entire chess set in Bauhaus modernist style.
- raspberrypilearning repository (CC-BY 4.0) with other examples.
Desen 2 D și Sketching
Draft tutorial
Introducerea în atelierul Desen 2 D( Draft workbench) .Basic Sketcher Tutorial
Introducere în Sketcher.Sketcher Micro Tutorial
Învățai să constrângeți eficient un pătrat.
Desenul Technic
Basic TechDraw Tutorial
Intro to creating drawings with the TechDraw workbench.Creating a new background template
Instructions to create a new page template in Inkscape for using with the TechDraw Workbench.
MEF
FEM tutorial
Introducerea în atelierul MEF (FEM workbench).Simple FEM introduction (v0.20)
This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results.FEM shear analysis of a composite block (v0.17)
Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane.Analysis of reinforced concrete with FEM (v0.19)
Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear.Electrostatic equation – Capacitance of two balls (v0.19)
This example shows how to simulate a capacitance. It illustrates how to setup the example, study it's various parts, solve it using the Elmer Solver and visualize the results using Clip Filter.Post-Processing of FEM results with Paraview (v0.19)
This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.
CNC & 3D Printing
Path Walkthrough for the Impatient
Prezentarea rapidă a Atelierului Traiectorie (Path module).
Randare
Creating renderings
With POV-Ray and LuxRender.Raytracing tutorial
Introduce fluxului de muncă a Atelierului de Randare(Raytracing workbench).
Robot workbench
Atelierul Robotică
Robot tutorial
simularea mișcării la Robot.
Scripting
These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.
Tutorials - Comprehensive list
Here are listed all the tutorials that are not in the manual regardless of their quality. If a tutorial is listed in the Category:Tutorials and not in this table please insert it.
Tutorial | Topic | Level | Time to complete hh:mm | Authors | FreeCAD version | Example files
| |
---|---|---|---|---|---|---|---|
Add Button to FEM Toolbar Tutorial | Finite Element Analysis | JohnWang | |||||
Add FEM Constraint Tutorial | Finite Element Analysis | M42kus | |||||
Add FEM Equation Tutorial | Finite Element Analysis | JohnWang | |||||
Adding a new mouse navigation option to FreeCAD (unfinished) | Programming | Advanced | Kunda1 | 0.19.x | None | ||
Advanced Attachment OYX | Attachment | Intermediate/Advanced | drmacro | 0.19 | None | ||
Advanced TechDraw Tutorial (unfinished) | TechDraw Workbench | Advanced | domad | 0.19 | None
| ||
Aeroplane | Part Workbench | Beginner | 0:10 | Hughthecat | No | ||
Analysis of reinforced concrete with FEM | Finite Element Analysis | Intermediate | 1:00 | HarryvL | 0.19 or above | ||
Arch panel tutorial | Arch Workbench | Beginner | 1:00 | Yorik | |||
Arch tutorial | Modeling | Intermediate | Yorik | 0.14 | |||
Basic Attachment Tutorial | Attachment | Beginner/intermediate | 1:00 | Bance | 0.17 or above | Basic Attachment Tutorial.FCStd | |
Basic modeling tutorial | Modelling | Beginner | 0:15 | NormandC | Any | None | |
Basic Part Design Tutorial | Modeling | Beginner | Mark Stephen (Quick61) and HarryGeier | 0.17 or above | Basic Part Design for v0.17 | ||
Basic Part Design Tutorial 019 | Modeling | Beginner | 1:00 | Carlo Dormeletti and Ed Williams | 0.19 or above | ||
Basic Sketcher Tutorial | Sketcher Workbench | Beginner | 1:00 | Drei and Vocx | 0.19 | Basic Sketcher tutorial | |
Basic TechDraw Tutorial | TechDraw Workbench | Beginner | WandererFan | 0.17 or above | Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample | ||
BIM ingame tutorial | Arch Workbench | Beginner | Yorik | ||||
Code snippets | Python | Beginner | |||||
Creating a simple part with Draft and Part WB | Modeling | Beginner | 1:30 | Heda | - | - | |
Creating a simple part with Part WB | Modeling | Beginner | 2:00 | Heda | - | - | |
Creating a simple part with PartDesign | Modeling | Beginner | 1:00 | GlouGlou | 0.17 or above | Creating a simple PartDesign Body.FCStd | |
Customize Toolbars | Customization | Beginner | 0:05 | Mario52 | Any | None | |
Draft ShapeString tutorial | Product Design | Beginner | 0:30 | r-frank and vocx | 0.17 or above | Draft_Shapestring_Text | |
Draft tutorial | Draft Workbench | Beginner | 0:30 | Drei and vocx | 0.19 | Draft tutorial updated | |
Dxf Importer Install | Import | Intermediate | 0:05 | Mario52 | Any | None | |
Engine Block Tutorial | Part Workbench | Beginner | 1:00 | Andrewbuck40 | 0.14.3700 | ||
Example Combined Footing | Reinforcement Workbench | Intermediate | Shiv Charan | 0.20 | None | ||
Example Slab Having LShape Rebars Reinforcement Mesh | Reinforcement Workbench | Intermediate | Shiv Charan | 0.20 | None | ||
Example Slab Having Mesh Of Straight Rebars | Reinforcement Workbench | Intermediate | Shiv Charan | 0.20 | None | ||
Example Slab Having UShape Rebars Reinforcement Mesh | Reinforcement Workbench | Intermediate | Shiv Charan | 0.20 | None | ||
Example Slab Spanning in One Direction | Reinforcement Workbench | Intermediate | Shiv Charan | 0.20 | None | ||
Example Slab Spanning in Two Directions | Reinforcement Workbench | Intermediate | Shiv Charan | 0.20 | None | ||
Export to STL or OBJ | Export | Beginner | 0:20 | r-frank | 0.16.6703 | ||
Extend FEM Module | Finite Element Analysis | M42kus | |||||
FEM CalculiX Cantilever 3D | Finite Element Analysis | Beginner | 0:10 | Bernd | 0.16.6377 or above | ||
FEM Example Capacitance Two Balls | Finite Element Analysis | Beginner | Sudhanshu Dubey | 0.19 | None | ||
FEM Shear of a Composite Block | Finite Element Analysis | Beginner/Intermediate | 0:30 | HarryvL | 0.17.12960 or above | ||
FEM tutorial | Finite Element Analysis | Beginner | 0:10 | Drei | 0.17 or above | ||
FEM Tutorial Python | Finite Element Analysis | Intermediate | 0:30 | Bernd | 0.18.15985 or above | ||
FreeCAD-Ship s60 tutorial | Ship Workbench | Beginner | |||||
FreeCAD-Ship s60 tutorial (II) | Ship Workbench | Beginner | |||||
How to install additional workbenches | Programming | Medium programmer | 0:15 | r-frank | Any | None | |
How to install macros | Programming | Medium programmer | 0:15 | Mario52 | Any | None | |
Import from STL or OBJ | Import | Beginner | 0:30 | r-frank | 0.16.6703 | ||
Import OpenSCAD code | Import | Beginner | 0:30 | r-frank | 0.16.6704 | None | |
Import text and geometry from Inkscape | Import | Beginner | 0:30 | r-frank | 0.16.6704 | ||
Import/Export IFC - compiling IfcOpenShell | Arch Workbench | Advanced | 2:00 | Pablo Gil | |||
Measurement Of Angles On Holes | TechDraw Workbench | Beginner | 0:01 | AnHi | 0.19 | ||
PartDesign Bearingholder Tutorial I | Product design | Beginner | 1:00 | NormandC | |||
PartDesign Bearingholder Tutorial II | Product design | Beginner | 1:00 | NormandC | |||
PartDesign tutorial | Sketcher Workbench | Beginner | 0:15 | Drei | 0.16 or above | ||
Path Walkthrough for the Impatient | Path Workbench | Chrisb | |||||
Plot Basic tutorial | Plot Workbench | Beginner | |||||
Plot MultiAxes tutorial | Plot workbench | Intermediate | |||||
Post-Processing of FEM Results with Paraview | Finite Element Analysis | Intermediate | 2:00 | HarryvL | 0.19 | Beam and wall | |
Private Preference Packs | Customization | Intermediate/Advanced | drmacro | 1.0 or above | |||
Python scripting tutorial | Programming | Intermediate | |||||
Raytracing tutorial | Raytracing Workbench | Beginner | 0:10 | Drei | 0.16 or above | ||
Robot 6-Axis | Robot Workbench | Intermediate | |||||
Robot tutorial | Robot Workbench | Beginner | r-frank | ||||
Scripted Parts: Ball Bearing - Part 1 | Python | Beginner | 0:30 | r-frank | 0.16.6706 | ||
Scripted Parts: Ball Bearing - Part 2 | Python | Beginner | 0:30 | r-frank | 0.16.6706 | ||
Scripts | Python | Beginner | onekk Carlo | 0.19 | |||
Sketcher Micro Tutorial - Constraint Practices | Sketcher Workbench | Beginner | 0:30 | Mark Stephen (Quick61) and vocx | 0.19 | Sketcher Constraints practices | |
Sketcher reference | Sketcher Workbench | ||||||
Sketcher requirement for a sketch | Sketcher Workbench | Beginner | Maker | None | |||
Sketcher Tutorial | Sketcher Workbench | Beginner | Ulrich | ||||
TechDraw HowTo Page | TechDraw Workbench | 0.19 | None | ||||
TechDraw Pitch Circle Tutorial | TechDraw Workbench | Beginner | 0:10 | Andergrin | 0.19 | None | |
TechDraw TemplateGenerator | TechDraw Workbench | Intermediate | FBXL5 | 0.19 | None | ||
TechDraw TemplateHowTo | TechDraw Workbench | Intermediate | 1:00 | wandererfan | 0.17 | None | |
Thread for Screw Tutorial | Product design | Advanced | 1:00 | DeepSOIC, Murdic, vocx | 0.19 | Updated: Thread for screw tutorial | |
Toothbrush Head Stand | Modeling | Beginner | 1:00 | EmmanuelG | 0.16 or above | Thingiverse 2403310 | |
Topological data scripting | Programming | Intermediate | |||||
Transient FEM analysis | Finite Element Analysis | ||||||
Tutorial custom placing of windows and doors | Arch Workbench | Intermediate | 1:00 | Vocx | 0.18 or above | None | |
Tutorial for open windows | Arch Workbench | Beginner | 1:00 | Vocx | 0.18 or above | None | |
Tutorial FreeCAD POV ray | Raytracing Workbench | Intermediate | 2:00 | Vocx | 0.18 or above | None | |
Tutorial KinematicAssembly | Assembly3 Workbench | Beginner | 0:30 | FBXL5 | 0.20 or above | None | |
Tutorial KinematicController | Programming | Intermediate | 1:00 | FBXL5 | 0.20 or above | None | |
Tutorial KinematicSkeleton | Assembly3 Workbench | Intermediate | 0:40 | FBXL5 | 0.20 | None | |
Tutorial Render with Blender | Rendering | Intermediate | 1:00 | Vocx | 0.18 or above | None | |
VRML Preparation for Robot Simulation | Robot Workbench | Intermediate | 0.11.4252ppa1 | ||||
Whiffle Ball tutorial | Product design | Beginner | 0:30 | r-frank and vocx | 0.17 or above | WhiffleBall_Tutorial_FCWiki.FCStd | |
Wikihouse porting tutorial | Import | Intermediate/Advanced | 1:00 |

- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Path, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub