Верстак Draft

    From FreeCAD Documentation
    This page is a translated version of the page Draft Workbench and the translation is 9% complete.
    Outdated translations are marked like this.
    Логотип верстака Draft на котором изображен кульман

    Введение

    Workbench Draft.svg Верстак Draft Workbench позволяет начертить простые двумерные объекты и предлагает некоторые инструменты для их последующей модификации. Он так же предоставляет инструменты для указания рабочей плоскости, сетки и привязки для точного управления расположением геометрии.

    Создаваемые плоские объекты могут использоваться для общего черчения как в программах Inkscape или Autocad. Эти плоские фигуры могут так же использоваться как базовые компоненты трёхмерных объектов, создаваемых другими верстаками, например, Workbench Part.svg Part и Workbench Arch.svg Arch. Так же возможно преобразование объектов Draft в объекты Workbench Sketcher.svg Sketch, это значит, что фигуры могут так же использоваться в Workbench PartDesign.svg верстаке PartDesign для создания твёрдых тел.

    The Draft Workbench also provides tools to define a working plane, a grid, and a snapping system to precisely control the position of geometry.

    FreeCAD — это, прежде всего, приложение для 3D-моделирования, и поэтому его инструменты для двумерного рисования не столь совершенны, как в других чертёжных программах. Если вашей основной целью является создание сложных 2D-чертежей и файлов в формате DXF, и вам не нужно 3D-моделирование, возможно вы захотите использовать специальное программное обеспечения для технического черчения, такое как LibreCAD, QCad, TurboCad и другие.

    Draft Workbench Example.png

    The image shows the grid aligned with the XY plane.
    On the left, in white, several planar objects.
    On the right a non-planar Draft Wire used as the Path Object of a Draft PathArray.

    Drafting

    • Draft Line.svg Line: creates a straight line.
    • Draft Wire.svg Polyline: creates a polyline (also called wire), a sequence of several connected line segments.
    • Draft Fillet.svg Fillet: creates a fillet, a rounded corner, or a chamfer, a straight edge, between two Draft Lines.
    • Draft Arc.svgToolbar flyout arrow blue background.svg Arc tools:
    • Draft Arc.svg Arc: creates a circular arc from a center, a radius, a start angle and an aperture angle.
    • Draft Arc 3Points.svg Arc by 3 points: creates a circular arc from three points that define its circumference.
    • Draft Circle.svg Circle: creates a circle from a center and a radius.
    • Draft Ellipse.svg Ellipse: creates an ellipse from two points defining a rectangle in which the ellipse will fit.
    • Draft Rectangle.svg Rectangle: creates a rectangle from two points.
    • Draft Polygon.svg Polygon: creates a regular polygon from a center and a radius.
    • Draft BSpline.svg B-spline: creates a B-spline curve from several points.
    • Draft CubicBezCurve.svgToolbar flyout arrow blue background.svg Bézier tools:
    • Draft Point.svg Point: creates a simple point.
    • Draft Facebinder.svg Facebinder: creates a surface object from selected faces.
    • Draft ShapeString.svg ShapeString: creates a compound shape that represents a text string.

    Annotation

    • Draft Text.svg Text: creates a multi-line text at a given point.
    • Draft Dimension.svg Dimension: creates a linear dimension, a radial dimension or an angular dimension.
    • Draft Label.svg Label: creates a multi-line text with a 2-segment leader line and an arrow.
    • Draft AnnotationStyleEditor.svg Annotation styles...: allows you to define styles that affect the visual properties of annotation-like objects.

    Modification

    • Draft Move.svg Move: moves or copies selected objects from one point to another.
    • Draft Rotate.svg Rotate: rotates or copies selected objects around a center point by a given angle.
    • Draft Scale.svg Scale: scales or copies selected objects around a base point.
    • Draft Mirror.svg Mirror: creates mirrored copies from selected objects.
    • Draft Offset.svg Offset: offsets each segment of a selected object over a given distance, or creates an offset copy of the selected object.
    • Draft Trimex.svg Trimex: trims or extends a selected object.
    • Draft Stretch.svg Stretch: stretches objects by moving selected points.
    • Draft Clone.svg Clone: creates linked copies, clones, of selected objects.
    • Draft OrthoArray.svgToolbar flyout arrow blue background.svg Array tools:
    • Draft OrthoArray.svg Array: creates an orthogonal array from a selected object. It can optionally create a Link array.
    • Draft PolarArray.svg Polar array: creates an array from a selected object by placing copies along a circumference. It can optionally create a Link array.
    • Draft CircularArray.svg Circular array: creates an array from a selected object by placing copies along concentric circumferences. It can optionally create a Link array.
    • Draft PathArray.svg Path array: creates an array from a selected object by placing copies along a path.
    • Draft PointArray.svg Point Array: creates an array from a selected object by placing copies at the points from a point compound.
    • Draft Edit.svg Edit: puts selected objects in Draft Edit mode. In this mode the properties of objects can be edited graphically.
    • Draft SubelementHighlight.svg Subelement highlight: temporarily highlights selected objects, or the base objects of selected objects.
    • Draft Upgrade.svg Upgrade: upgrades selected objects.

    Draft Tray

    Панель инструментов Draft появляется когда стартует верстак, и позволяет выбрать рабочую плоскость, вместе с некоторыми визуальными параметрами вроде цвета линии, цвета фигур, размера текста, ширина линии, и автоматической группы.

    Draft tray default.png

    • Draft tray button plane.png Select Plane: selects the current Draft working plane. Also available in the menu: Draft → Utilities → Draft SelectPlane.svg Select Plane.
    • Draft tray button style.png Set style: sets the default style for new objects. Also available in the menu: Draft → Utilities → Draft SetStyle.svg Set style.
    • Draft tray button construction.png Toggle construction mode: switches Draft construction mode on or off. Also available in the menu: Draft → Utilities → Draft ToggleConstructionMode.svg Toggle construction mode.

    Draft annotation scale widget

    With the Draft annotation scale widget the Draft annotation scale can be specified.

    Draft annotation scale widget button.png

    Draft snap widget

    The Draft snap widget can be used as an alternative for the Draft snap toolbar.

    Draft snap widget button.png

    Панель инструментов привязки Draft

    Панель инструментов Draft Snap позволяет выбрать текущий режим привязки. Его кнопка остаётся ненажатой при активности режима.

    • Draft Snap Lock.svg Snap Lock: enables or disables snapping globally.
    • Draft Snap Angle.svg Snap Angle: snaps to the special cardinal points on circular edges, at multiples of 30° and 45°.
    • Draft Snap Extension.svg Snap Extension: snaps to an imaginary line that extends beyond the endpoints of straight edges.
    • Draft Snap Parallel.svg Snap Parallel: snaps to an imaginary line parallel to straight edges.
    • Draft Snap Special.svg Snap Special: snaps to special points defined by the object.
    • Draft Snap Near.svg Snap Near: snaps to the nearest point on faces and edges.
    • Draft Snap Ortho.svg Snap Ortho: snaps to imaginary lines that cross the previous point at multiples of 45°.
    • Draft Snap Grid.svg Snap Grid: snaps to the intersections of grid lines.

    Сервисные инструменты

    Меню Вспомогательные

    Дополнительные инструменты доступны из меню Draft → Вспомогательные, или через контекстное меню по правому клику мыши, зависящее от выбранного объекта.

    • Draft Heal.svg Heal: heals problematic Draft objects found in very old files.

    Дополнительные возможности

    • Геометрические ограничения: ограничивает указатель в горизонтальном или вертикальном перемещении относительно предыдущей точки.
    • Привязка: позволяет разместить новые точки на специальных частях существующих объектов или на сетке.
    • Construction Mode: позволяет создавать отдельную от остальной геометрию, просто включая или выключая этот режим.
    • Рабочая плоскость: позволяет задать плоскость в трёхмерном пространстве, где будут проводиться операции с плоскими фигурами

    Tree view context menu

    The following additional options are available in the Tree view context menu:

    Default options

    For most Draft objects the following option is available:

    If there is an active document the context menu contains an additional sub-menu:

    • Utilities: a subset of the tools available in the main Draft Utilities menu.

    Wire options

    For a Draft Line and a Draft Wire this additional option is available:

    • Draft Edit.svg Flatten: flattens the wire on the current Draft working plane. This option does not work properly in version 0.19 and below.

    Layer container options

    For a Draft LayerContainer these additional options are available:

    Layer options

    For a Draft Layer these additional options are available:

    Working plane proxy options

    For a Draft WorkingPlaneProxy these additional options are available:

    • Draft SelectPlane.svg Write objects state: updates the ВидVisibility Map property of the working plane proxy with the current visibility state of objects in the document.

    3D view context menu

    The following additional options are available in the 3D view context menu:

    Default options

    If there is an active document the context menu contains one additional sub-menu:

    • Utilities: a subset of the tools available in the main Draft Utilities menu.

    Устаревшее

    • Draft Drawing.svg Drawing: inserts views of selected objects into a drawing page. Not available in version 0.21 and above.

    Настройки

    • Preferences-draft.svg Preferences: общие настройки для рабочей плоскости и инструментов черчения.
    • Preferences-import-export.svg Import-Export Preferences: настройки, доступные для импорта и экспорта в различные форматы файлов.

    Форматы файлов

    Эти функции предназначены для открытия, импорта или экспорта других форматов файлов. Открытие подразумевает открытие нового документа с содержимым файла, в то время как импортирование добавляет содержимое файла в текущий документ. Экспорт сохраняет выделенные объекты в файл. Если ничего не выбрано, будут экспортированы все объекты. Учитывайте, что задача модуля Draft - работа с плоскими объектами, так что процедуры импорта фокусируются на двумерных объектах, хотя форматы DXF и OCA так же поддерживают определения объектов в трёхмерном пространстве (объекты не обязательно плоские), они не импортируют объекты вроде сеток, трйхмерных поверхностей и так далее, а только линии, окружности, тексты или плоские фигуры. Ныне поддерживаемые форматы файлов: Верстак Draft позволяет FreeCAD импортировать и экспортировать следующие форматы файлов:

    Модульные тесты

    Смотри так же: Test Workbench.

    Для запуска модульных тестов рабочей среды выполните следующие действия с терминала операционной системы.

    freecad -t TestDraft
    

    Написание сценариев

    Инструменты модуля Draft могут использоваться в макросах и в консоли Python, используя программный интерфейс Draft.

    Рабочая среда включает модуль для создания образцов всех объектов в новом документе. introduced in version 0.19

    Используйте это, чтобы проверить, что все объекты произведены правильно.

    import drafttests.draft_test_objects as dto
    doc = dto.create_test_file()
    

    Проверка кода этого модуля полезна, чтобы понять, как использовать интерфейс программирования.

    Tutorials