Ambiente de trabajo Borrador
Introducción
El Ambiente de trabajo Borrador se centra principalmente en la creación y modificación de objetos 2D en FreeCAD. Pero no está restringido al plano XY del sistema global de coordenadas. Sus objetos pueden tener cualquier orientación y posición en el espacio 3D, y algunos objetos de Borrador pueden ser planos o no planos.
Los objetos Borrador se pueden utilizarse para elaboración general, similar a lo que se puede hacer con Inkscape o AutoCAD. Pero también pueden ser la base para la creación de objetos 3D en otros bancos de trabajo. Un Borrador Hilo puede definir la trayectoria de un Arquitectura Muro, un Borrador Polígono puede ser extruido con Pieza Extrudir, etc. Muchas de las Borrador herramientas de modificación pueden aplicarse a objetos 2D y 3D creados con otros ambientes de trabajo también. Puedes, por ejemplo, mover un Croquis o crear un Borrador OrthoArreglo a partir de un objeto Pieza.
The Draft Workbench also provides tools to define a working plane, a grid, and a snapping system to precisely control the position of geometry.
Si tu objetivo principal es la producción de dibujos 2D complejos y archivos DXF, y no necesitas el modelado 3D, FreeCAD puede no ser la elección correcta para ti. Es posible que desee considerar un programa de software dedicado para el dibujo técnico en su lugar, como LibreCAD o QCad.
The image shows the grid aligned with the XY plane.
On the left, in white, several planar objects.
On the right a non-planar Draft Wire used as the Path Object of a Draft PathArray.
Drafting
- Line: creates a straight line.
- Polyline: creates a polyline, a sequence of several connected line segments.
- Fillet: creates a fillet, a rounded corner, or a chamfer, a straight edge, between two Draft Lines. introduced in version 0.19
- Arc: creates a circular arc from a center, a radius, a start angle and an aperture angle.
- Arc by 3 points: creates a circular arc from three points that define its circumference. introduced in version 0.19
- Circle: creates a circle from a center and a radius.
- Ellipse: creates an ellipse from two points defining a rectangle in which the ellipse will fit.
- Rectangle: creates a rectangle from two points.
- Polygon: creates a regular polygon from a center and a radius.
- B-spline: creates a B-spline curve from several points.
- Cubic Bézier curve: creates a Bézier curve of the third degree. introduced in version 0.19
- Bézier curve: creates a Bézier curve from several points.
- Point: creates a simple point.
- Facebinder: creates a surface object from selected faces.
- ShapeString: creates a compound shape that represents a text string.
- Hatch: creates hatches on the planar faces of a selected object. introduced in version 0.20
Annotation
- Text: creates a multi-line text at a given point.
- Dimension: creates a linear dimension, a radial dimension or an angular dimension.
- Label: creates a multi-line text with a 2-segment leader line and an arrow.
- Annotation styles...: allows you to define styles that affect the visual properties of annotation-like objects. introduced in version 0.19
Modificación
- Move: moves or copies selected objects from one point to another.
- Rotate: rotates or copies selected objects around a center point by a given angle.
- Scale: scales or copies selected objects around a base point.
- Mirror: creates mirrored copies from selected objects.
- Offset: offsets each segment of a selected object over a given distance, or creates an offset copy of the selected object.
- Trimex: trims or extends a selected object.
- Stretch: stretches objects by moving selected points.
- Clone: creates linked copies, clones, of selected objects.
- Array: creates an orthogonal array from a selected object. It can optionally create a Link array. introduced in version 0.19
- Polar array: creates an array from a selected object by placing copies along a circumference. It can optionally create a Link array. introduced in version 0.19
- Circular array: creates an array from a selected object by placing copies along concentric circumferences. It can optionally create a Link array. introduced in version 0.19
- Path array: creates an array from a selected object by placing copies along a path.
- Path Link array: idem, but create a Link array instead of a regular array. introduced in version 0.19
- Point Array: creates an array from a selected object by placing copies at the points from a point compound.
- Point Link array: idem, but create a Link array instead of a regular array. introduced in version 0.19
- Edit: puts selected objects in Draft Edit mode. In this mode the properties of objects can be edited graphically.
- Subelement highlight: temporarily highlights selected objects, or the base objects of selected objects.
- Join: joins Draft Lines and Draft Wires into a single wire.
- Split: splits a Draft Line or Draft Wire at a specified point or edge.
- Upgrade: upgrades selected objects.
- Downgrade: downgrades selected objects.
- Wire to B-spline: converts Draft Wires to Draft BSplines and vice versa.
- Draft to Sketch: converts Draft objects to Sketcher Sketches and vice versa.
- Set slope: slopes selected Draft Lines or Draft Wires by increasing, or decreasing, the Z coordinate of all points after the first one.
- Flip dimension: rotates the dimension text of selected Draft Dimensions 180° around the dimension line.
- Shape 2D view: creates 2D projections from selected objects.
Borrador Bandeja
La Borrador Bandeja Barra herramienta aparece cuando se inicia el ambiente de trabajo, y permite seleccionar el plano de trabajo, junto con algunas propiedades visuales como el color de la línea, el color de la forma, el ancho de la línea, el tamaño del texto y el grupo automático.
- Plano Trabajo: establece un plano de trabajo desde una vista estándar o una cara seleccionada.
- Establece estilo: establece el estilo por defecto para los nuevos objetos, y opcionalmente aplica el estilo a los objetos y grupos seleccionados.
- Modo de construcción: activa o desactiva el modo de construcción Borrador.
- AutoGrupo: coloca automáticamente los nuevos objetos en un determinado Grupo Std, Capa de Borrador, o uno de los objetos tipo grupo del Am iente de Trabajo Arquitectura, como Arquitectura EdificarPieza. introducido en la versión 0.17
- Set style: sets the default style for new objects. Also available in the menu: Draft → Utilities → Set style. introduced in version 0.19
- Toggle construction mode: switches Draft construction mode on or off. Also available in the menu: Draft → Utilities → Toggle construction mode.
- AutoGroup: changes the active Draft Layer or, optionally, the active Std Group or group-like Arch object.
Borrador Widget escala de anotacion
With the Draft annotation scale widget the Draft annotation scale can be specified. introduced in version 0.19
Borrador Widget Atrapar
The Draft snap widget can be used as an alternative for the Draft Snap toolbar. introduced in version 0.19
Borrador Barra de herramientas Atrapar
La barra de herramientas Borrador Atrapar permite seleccionar el modo de ajuste actual. Su botón se mantiene pulsado cuando un modo está activo.
- Snap Lock: enables or disables snapping globally.
- Snap Endpoint: snaps to the endpoints of edges.
- Snap Midpoint: snaps to the midpoint of straight and circular edges.
- Snap Center: snaps to the center point of faces and circular edges, and to the DatosPlacement point of Draft WorkingPlaneProxies and Arch BuildingParts.
- Snap Angle: snaps to the special cardinal points on circular edges, at multiples of 30° and 45°.
- Snap Intersection: snaps to the intersection of two edges.
- Snap Perpendicular: snaps to the perpendicular point on edges.
- Snap Extension: snaps to an imaginary line that extends beyond the endpoints of straight edges.
- Snap Parallel: snaps to an imaginary line parallel to straight edges.
- Snap Special: snaps to special points defined by the object.
- Snap Near: snaps to the nearest point on faces or edges.
- Snap Ortho: snaps to imaginary lines that cross the previous point at 0°, 45°, 90° and 135°.
- Snap Grid: snaps to the intersections of grid lines.
- Snap WorkingPlane: projects the snap point onto the current working plane.
- Snap Dimensions: shows temporary X and Y dimensions.
- Toggle Grid: switches the grid on or off.
Borrador Herramientas de utilidad
- Layer: creates a Draft Layer. introduced in version 0.19
- Add a new named group: creates a named Std Group and moves selected objects to that group. introduced in version 0.20
- Move to group...: moves objects to a Std Group. It can also ungroup objects.
- Select group: selects the content of Draft Layers, Std Groups or group-like Arch objects.
- Add to Construction group: moves objects to the Draft construction group.
- Toggle normal/wireframe display: switches the VistaDisplay Mode property of selected objects between
Flat Lines
andWireframe
.
- Create working plane proxy: creates a working plane proxy to save the current Draft working plane.
Herramientas adicionales
Herramientas adicionales disponibles desde el menú Bosquejo → Utilidades, o a través del menú contextual del botón derecho, dependiendo de los objeto seleccionados.
- Apply current style: applies the current style settings to selected objects.
- Heal: heals problematic Draft objects found in very old files.
- Toggle continue mode: switches continue mode on or off.
- Show snap toolbar: shows the Draft Snap toolbar.
Características adicionales
- Coordinates: introducir coordenadas en lugar de hacer clic en la vista 3D para definir un nuevo punto.
- Restricción: limitar el puntero a movimientos horizontales o verticales en relación con un punto previo.
- Ajuste: colocar nuevos puntos en lugares especiales de los objetos existentes o en la cuadrícula.
- Modo de copia: Todas las herramientas de modificación pueden modificar los objetos seleccionados o crear una copia modificada de los mismos. Si se mantiene pulsada la tecla Alt mientras se modifica el objeto, por ejemplo, moviéndolo o rotándolo, se crea una copia cuando se suelta la tecla.
- Modo de construcción: Permite crear geometrías separadas del resto, simplemente activándolas y desactivándolas.
- Plano de trabajo: permite seleccionar una superficie sobre la que construir las formas.
Menú contextual de vista de árbol
The following additional options are available in the Tree view context menu:
Default options
If there is an active document the context menu contains one additional sub-menu:
- Utilities: a subset of the tools available in the main Draft Utilities menu.
Opciones Hilos
For a Draft Wire, Draft BSpline, Draft CubicBezCurve and Draft BezCurve this additional option is available:
- Flatten this wire: flattens the wire based on its internal geometry. This option currently does not work properly.
Opciones contenedor capas
For a Draft LayerContainer these additional options are available:
- Add new layer: adds a new layer to the current document.
Opciones capa
For a Draft Layer these additional options are available:
- Activate this layer: activates the selected layer.
- Select layer contents: selects the objects inside the selected layer.
Plano trabajo opciones proxy
For a Draft WorkingPlaneProxy these additional options are available:
- Write camera position: updates the VistaView Data property of the working plane proxy with the current 3D view camera settings.
- Write objects state: updates the VistaVisibility Map property of the working plane proxy with the current visibility state of objects in the document.
3D vista menú contextual
The following additional options are available in the 3D view context menu:
Default options
If there is an active document the context menu contains one additional sub-menu:
- Utilities: a subset of the tools available in the main Draft Utilities menu.
Herramientas obsoletas
Estas herramientas se eliminaron de la interfaz en la v0.19 porque ya no tenían ninguna utilidad.
- VisGrupo: crea un VisGrupo en el documento actual. Esto fue reemplazado por Capa. Template:Obsoleto/es
- Finalización línea: termina el dibujo del Borrador Alambre o Borrador BSpline actual, sin cerrarlo. Template:Obsoleto/esobsoleto en versión 0.19
- Cerrar línea: finaliza el dibujo del Borrador Alambre o Borrador BSpline actual, y lo cierra. Template:Obsoleto/es
- Deshacer línea: deshace el último segmento de un Borrador Alambre. Template:Obsoleto/es
- Drawing: inserts views of selected objects into a drawing page. obsolete in version 0.17
Preferencias
- Preferencias: preferencias generales para el plano de trabajo y las herramientas de dibujo.
- Preferencias de importación y exportación: preferencias disponibles para importar desde y exportar a diferentes formatos de archivo.
- Import Export Preferences: preferences available for importing from and exporting to different file formats.
Formatos de archivo
Son funciones para abrir, importar o exportar otros formatos de archivo. Abrir abrirá un nuevo documento con el contenido del archivo, mientras que importar añadirá el contenido del archivo al documento actual. Exportar guardará los objetos seleccionados en un archivo. Si no se selecciona nada, se exportarán todos los objetos. Tenga en cuenta que el propósito del Módulo Borrador es trabajar con objetos 2D, por lo que esas rutinas de importación se centran sólo en objetos 2D, y aunque los formatos DXF y OCA también soportan definiciones de objetos en el espacio 3D (los objetos no son necesariamente planos), no importarán objetos volumétricos como mallas, superficies 3D, etc., sino líneas, círculos, textos o formas planas. Los formatos de archivo actualmente soportados son: El módulo Borrador proporciona a FreeCAD importadores y exportadores para los siguientes formatos de archivo:
- Autodesk .DXF: importa y exporta archivos Drawing Exchange Format creados con otras aplicaciones de CAD 2D. Ver también FreeCAD y DXF Importación.
- Autodesk .DWG: importa y exporta archivos DWG a través del importador DXF, cuando la utilidad ODA Converter está instalada. Ver también FreeCAD y DWG Importación.
- SVG (como geometría): importa y exporta archivos Scalable Vector Graphics creados con aplicaciones de dibujo vectoriales
- Open Cad format .OCA: importa y exporta archivos OCA/GCAD, un potencialmente nuevo formato de archivo abierto para CAD
- Ala Data Format .DAT: importa archivos DAT describiendo Ala perfiles
Pruebas unitarias
Véase también: Ambiente de trabajo Prueba.
Para ejecutar las pruebas unitarias del banco de trabajo, ejecute lo siguiente desde el terminal del sistema operativo.
freecad -t TestDraft
Guionización
Las herramientas de Bosquejo pueden utilizarse en macros y desde la Python consola utilizando la Bosquejo API.
El ambiente de trabajo incluye un módulo para crear muestras de todos los objetos en un nuevo documento. introducido en la versión 0.19
Utilícelo para comprobar que todos los objetos se producen correctamente.
import drafttests.draft_test_objects as dto
doc = dto.create_test_file()
Inspeccionar el código de este módulo es útil para entender cómo utilizar la interfaz de programación.
Tutoriales
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub