Draft Spiegeln
Entwurf Spiegel |
Menüeintrag |
---|
Draft → Mirror |
Arbeitsbereich |
Draft, Arch |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Draft Scale, Draft Clone |
Beschreibung
Das Spiegelwerkzeug erstellt eine gespiegelte Kopie eines ausgewählten Objekts mit der Operation Part Mirror. Die Kopie ist, genau wie ein Draft Clone, mit dem Originalobjekt verknüpft. Das bedeutet, wenn das Originalobjekt seine Form und Eigenschaften ändert, ändert sich auch die gespiegelte Form.
Das Spiegel Werkzeug kann auf 2D Formen angewendet werden, die mit dem [[Draft Workbench/de|Draft Arbeitsbereich] erstellt wurden, kann aber auch auf vielen Arten von 3D Objekten, wie sie mit der Part Arbeitsbereich, PartDesignArbeitsbereich] oder Arch Arbeitsbereich en angewendet werden.
Um Kopien oder Klone zu erzeugen und sie manuell zu platzieren, verwende Entwurf bewegen, Entwurf drehen und Entwurf klonen.
Gespiegeltes Objekt, das unter Verwendung einer Spiegellinie erstellt wurde.
Anwendung
- Wähle ein Objekt aus, das Sie spiegeln möchten.
- Drücke die Taste 16px Entwurf spiegel. Wenn kein Objekt ausgewählt ist, wirst du aufgefordert, eines auszuwählen.
- Klicke auf einen ersten Punkt in der 3D Ansicht, oder gib eine Koordinate ein und drücke die Taste . Schaltfläche Punkt hinzufügen.
- Klicke auf einen zweiten Punkt in der 3D Ansicht, oder gib eine Koordinate ein und drücken Sie die Taste . Schaltfläche Punkt hinzufügen Diese Punkte definieren eine Linie, die zusammen mit der Kameraansicht eine Spiegelebene definiert, die zum Erstellen des gespiegelten Objekts verwendet wird.
Nach der Erstellung der gespiegelten Kopie kann die Bindung mit dem Originalobjekt mit der Taste entfernt werden. Part Erzeuge einfache Kopie Werkzeug.
Eine gespiegelte Kopie eines Entwurfsobjekts kann in ein Draft Wire, durch Anwendung von Draft Downgrade dann Draft Upgrade umgewandelt werden.
Options
- Press X, Y or Z after the first point to constrain the second point on the given axis.
- To enter coordinates manually, simply enter the numbers, then press Enter between each X, Y and Z component.
- Press R or click the checkbox to toggle relative mode. If relative mode is on, the coordinates of the second point are relative to the first one; if not, they are absolute, taken from the origin (0,0,0).
- Press T or click the checkbox to toggle continue mode. If continue mode is on, the Mirror tool will restart after you give the second point, allowing you to put another object without pressing the tool button again.
- Hold Ctrl while drawing to force snapping your point to the nearest snap location, independently of the distance.
- Hold Shift while drawing to constrain your second point horizontally or vertically in relation to the first one.
- Press Esc or the Close button to abort the current command.
Properties
- DatenSource: specifies the object to mirror,
- DatenBase: specifies the base point of the mirror plane.
- DatenNormal: specifies the normal direction of the mirror plane.
Scripting
See also: Draft API and FreeCAD Scripting Basics.
The Mirror tool can be used in macros and from the Python console by using the following function:
mirrored_list = mirror(objlist, p1, p2)
- Creates Part Mirror objects from
objlist
, which can be a single object or a list of objects. - The mirroring plane is defined by the line built with points
p1
andp2
, and parallel to the current view. mirrored_list
is returned with the new objects.mirrored_list
is either a single object or a list of objects, depending on the inputobjlist
.
Example:
import FeeCAD, Draft
place = FreeCAD.Placement(FreeCAD.Vector(1000, 0, 0), FreeCAD.Rotation())
Polygon1 = Draft.makePolygon(3, 750)
Polygon2 = Draft.makePolygon(5, 750, placement=place)
p1 = FreeCAD.Vector(2000, -1000, 0)
p2 = FreeCAD.Vector(2000, 1000, 0)
Line1 = Draft.makeLine(p1, p2)
mirrored1 = Draft.mirror(Polygon1, p1, p2)
Line2 = Draft.makeLine(-p1, -p2)
mirrored2 = Draft.mirror([Polygon1, Polygon2], -p1, -p2)
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub