Ubuntu Snap

    From FreeCAD Documentation
    This page is a translated version of the page Ubuntu Snap and the translation is 21% complete.
    Outdated translations are marked like this.

    Einführung

    Ein Ubuntu Snap Paket oder einfach nur Snap ist ein Distributionsformat, das dem AppImage insofern ähnelt, als es als "universell installierbares Paket" für die Bereitstellung von Software in Linux Systemen gedacht ist. Snaps wurden von Ubuntu eingeführt, aber sie sollen in allen Linux Distributionen laufen, solange der Snap Daemon, oder snapd, im Zielsystem verfügbar ist.

    Ein Snap Paket hat zwei Hauptmerkmale:

    • Programme sind in einem Sandkasten untergebracht, so dass sie den Rest Ihres Betriebssystems nicht stören.
    • Programme werden automatisch im Hintergrund aktualisiert, um die neueste Version der Anwendung zu erhalten.

    Weitere Möglichkeiten zur Installation der Software siehe Installation unter Linux.

    Einrichtung

    Ab v0.19 ist die Verwendung von Snaps experimentell. Die aktuellen Snaps werden von Freiwilligen generiert und bereitgestellt.

    In allen Systemen, in denen Snaps installiert werden sollen, muss zuerst der Snap Daemon installiert werden. Das Paket heißt normalerweise snapd.

    Debian/Ubuntu

    Für Debian/Ubuntu und ähnliche Systeme, die den APT Verwalter verwenden, wird der Daemon wie folgt installiert:

    sudo apt install snapd
    

    Um die stabile Version des Snap zu installieren, verwende

    sudo snap install freecad
    

    Um die Entwicklungsversion des Snap zu installieren, verwende:

    sudo snap install --edge freecad
    

    Manjaro

    To install the stable version of the Snap use:

    snap install freecad
    

    To install the development version of the Snap use:

    snap install --edge freecad
    

    Notes

    What FC version am I running

    To figure out which development version is installed type the following in the Command-line interface:

    snap info freecad
    

    Changing between different Snaps

    Starting from the tail end of the v0.20 release cycle, the FreeCAD snap maintainers added the ability to test experimental FreeCAD builds. Snaps allow for this by easily toggling between different snaps (terminology is 'channels or tracks'). For example:

    Testing the Topological Naming ('toponaming') branch (created at the start of the v0.21/v1.0 release cycle):

    snap refresh freecad --channel=latest/edge/toponaming
    

    Using the refresh command will switch and update the snap channel you're switching to:

    snap refresh freecad --channel=latest/edge/toponaming
    

    Toggling back to the nightly 'edge' channel:

    snap refresh freecad --channel=latest/edge
    

    Advanced

    The following commands are geared towards users that are familiar with git and have a locally cloned repository of the upstream FreeCAD repository.

    git clone https://github.com/FreeCAD/FreeCAD
    cd FreeCAD/
    

    To find out the latest upstream revision number (also known as 'HEAD'):

    git pull upstream master  # first make sure we have the most up-to-date commits
    git rev-list --count HEAD # 'HEAD' refers to the current commit you are viewing (tip of the master branch)
    

    To translate the current snap development version in to a revision number (make sure you're within your cloned FreeCAD repository as mentioned above):

    snap info freecad |\
    grep -e '^\s\+latest/edge' |\
    awk -F ' ' '{ print $2 }' |\
    xargs -I{} git rev-list --count {}
    

    Note: the above bash script 1 liner assumes user has 'edge' (nightly) installed

    The difference between HEAD and the snap edge revision numbers indicates the amount of revisions trailing behind upstream the snap development (edge) is.

    Taking it a step further, if you want a short summary of the commits between the current snap edge and HEAD:

    snap info freecad |\
    grep -e '^\s\+latest/edge' |\
    awk -F ' ' '{ print $2 }' |\
    xargs -I{} git log --oneline --ancestry-path {}..HEAD
    

    Note: The output will indicate what commits are not in the current 'edge' (but will be on the next nightly update).

    Verweise

    Weitere Informationen über die aktuellen Bemühungen, mit Snaps umzugehen.

    Repositories

    Maintainer(s)

    Related

    • AppImage - another self-contained 'binary' like format to run FreeCAD
    • Flatpak packages