Draft Form2DAnsicht

From FreeCAD Documentation
This page is a translated version of the page Draft Shape2DView and the translation is 54% complete.

Draft Form2DAnsicht

Änderung → Form in 2D Ansicht
Draft, Arch
Eingeführt in Version
Siehe auch
TechDraw FormProjizieren


Der Befehl Draft Form2DAnsicht erstellt 2D-Projektionen von ausgewählten Objekten, in der Regel 3D-Festkörper oder Arch Schnittebenen. Die Projektionen werden in der 3D-Ansicht dargestellt.

Draft Shape2DView projections can be displayed on a TechDraw Workbench page using the TechDraw DraftView command. Alternatively the TechDraw Workbench offer its own projection commands. But these create projections that are only displayed on the drawing page and not in the 3D view.

Projection of solid shapes onto the XY plane


  1. Optionally rotate the 3D view. The camera direction in the 3D view determines the projection vector. For example, a top view will project onto the XY plane. The projection vector is ignored for projections created from Arch SectionPlanes.
  2. Optionally select one or more objects.
  3. There are several ways to invoke the command:
    • Press the Shape 2D view button.
    • Select the Modification → Shape 2D view option from the menu.
  4. If you have not yet selected an object: select an object in the 3D view.
  5. The projected objects are created on the XY plane.

How to produce plans and sections with different linewidths

Drawings with different linewidths for viewed and cut lines can easily be produced by using two shape2Dview objects from a same Arch SectionPlane. One of the shape2Dview objects has its projection mode set to Solid, which renders the viewed lines, and another set to Cut lines or Cut faces to render the cut lines. The two shape2Dviews are then placed at the same location, one on top of the other.


Siehe auch: Eigenschafteneditor.

Ein Draft Shape2DView-Objekt wird von einem Part Part2DObject abgeleitet und erbt alle seine Eigenschaften. Außerdem hat es die folgenden zusätzlichen Eigenschaften:



  • DatenAuto Update (Bool): specifies if the projection should be automatically recomputed if the DatenBase object changes. Selecting false can be useful if there are many Draft Shape2DViews in a document or if they are complex. If set to false the Std Refresh command must be used to update the projection. introduced in version 0.20
  • DatenBase (Link): specifies the object to be projected.
  • DatenClip (Bool): if this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property.
  • DatenFace Numbers (IntegerList): specifies the indices of the faces to be projected. Only works if DatenProjection Mode is Individual Faces.
  • DatenFuse Arch (Bool): specifies if Arch objects of the same type and material are fused or not.
  • DatenHidden Lines (Bool): specifies if hidden lines are shown or not.
  • DatenIn Place (Bool): only works if the selected object is an Arch SectionPlane, and DatenProjection Mode is Cutlines or Cutfaces, specifies if the projection will appear co-planar with the section plane.
  • DatenProjection (Vector): specifies the direction of the projection. Ignored if DatenBase is an Arch SectionPlane.
  • DatenProjection Mode (Enumeration): specifies the projection mode. The following modes are available:
    • Solid: projects the entire selected object.
    • Individual Faces: only projects the faces in the DatenFace Numbers list.
    • Cutlines: only works if the selected object is an Arch SectionPlane, projects only the edges cut by the section plane.
    • Cutfaces: only works if the selected object is an Arch SectionPlane, projects the areas cut through solids by the section plane as faces.
    • Solid faces: projects the entire selected object by cutting faces one by one. Can be used if the Solid mode gives wrong results. introduced in version 0.20
  • DatenSegment Length (Float): specifies the size in millimeters of linear segments if DatenTessellation is true.
  • DatenTessellation (Bool): specifies if tessellation should be performed. Tessellation means that curves are replaced by sequences of line segments. This can be computationally intensive if the DatenSegment Length is too short.
  • DatenVisible Only (Bool): specifies if the projection should only be recomputed if it is visible.
  • DatenExclusion Points (Vector list): A list of exclusion points. Any edge passing through any of those points will not be drawn. introduced in version 0.20
  • DatenExclusion Names (String list): A list of object names. Any viewed or cut child object with a name in that list will not be drawn. introduced in version 0.21



  • AnsichtPattern (Enumeration): nicht verwendet.
  • AnsichtPattern Size (Float): nicht verwendet.


See also: Autogenerated API documentation and FreeCAD Scripting Basics.

To create a 2D projection use the make_shape2dview method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makeShape2DView method.

shape2dview = make_shape2dview(baseobj, projectionVector=None, facenumbers=[])
  • baseobj is the object to be projected.
  • projectionVector is the projection vector. If not supplied the Z axis is used.
  • facenumbers is a list of face numbers (0-based). If supplied only these faces are considered.
  • shape2dview is returned with the created 2D projection.

Change the ProjectionMode property of the created object if required. It can be: "Solid", "Individual Faces", "Cutlines", "Cutfaces" or "Solid faces".


import FreeCAD as App
import Draft

doc = App.newDocument()

box = doc.addObject("Part::Box", "Box")
box.Length = 2300
box.Width = 500
box.Height = 1000

shape1 = Draft.make_shape2dview(box)

shape2 = Draft.make_shape2dview(box, App.Vector(1, -1, 1))

shape3 = Draft.make_shape2dview(box, App.Vector(-1, 1, 1), [0, 5])
shape3.ProjectionMode = "Individual Faces"