CAM: Karta konfiguracji
Description
Using a SetupSheet allows the user to customize how the various property values for operations will be calculated. The user always has the option to override the SetupSheet values with an explicit value or change the way SetupSheet values are calculated.
Since SetupSheets are part of the CAM Job, values do not changes the default behavior of CAM. Rather, they change only the behaviour within the context of the current job.
SetupSheets are particularly useful when saved with a Job Template.
Properties
- DANEVertRapid: Sets the Vertical Rapid Rate in new Tool Controllers. (Used in post processors that support customizable Rapid rates)
- DANEHorizRapid: Sets the Horizontal Rapid Rate in new Tool Controllers. (Used in post processors that support customizable Rapid rates)
- DANESafeHeightOffset: The usage of this field depends on SafeHeightExpression (see below)
- DANE SafeHeightExpression: The result of this expression will be used to set the Safe Height of operations.
- DANEClearanceHeightOffset: The usage of this field depends on ClearanceHeightExpression (see below)
- DANEClearanceHeightExpression: The result of this expression will be used to set the Clearance Height of operations.
- DANEStartDepthExpression: The result of this expression will be used to set the StartDepth property of operations.
- DANE FinalDepthExpression: The result of this expression will be used to set the FinalDepth property of operations.
- DANEStepDownExpression: The result of this expression will be used to set the StepDown property of operations.
Operation Parameters
The following are pulled from:
- OpFinalDepth - The value of the FinalDepth property
- OpStartDepth - The value of the FinalDepth property
- OpToolDiameter - The value of the Tool Diameter property of the Tool Controller referenced by the operation.
SetupSheet Values
Other values in the SetupSheet can be referenced directly:
- SetupSheet.ClearanceHeightOffset
- SetupSheet.SafeHeightOffset
- StartDepth
- SafeHeightOffset
- SafeHeightExpression
- ClearanceHeightOffset
- ClearanceHeightExpression
- StartDepthExpression
- FinalDepthExpression
- StepDownExpression
Środowisko pracy CAM
- Polecenia projektu: Zadanie, Przetwarzanie końcowe, Bezpieczeństwo, Eksport szablonu
- Polecenia narzędzi: Przeglądaj polecenia ścieżki, Symulator, Krawędzie w pętli, Przełącz aktywną operację, Otwarta biblioteka narzędzi, Stacja dokująca narzędzi
- Operacje podstawowe: Kontur, Kształt kieszeni, Owierty, Powierzchnia obróbki, Helisa, Algorytm adaptacyjny, Wpust, Grawer, Usuwanie zadziorów, Wycięcie V
- Operacje 3D: Obiekt 3D kieszeni, Powierzchnia 3D, Linia poziomu
- Ulepszenia: Odwzorowanie osi, Ulepszenie ścieżki konturu, Nadcięcie w narożniku, Rylec, Wprowadzenie / Wyprowadzenie, Parkowanie narzędzia, Pola mocujące, Korekta głębokości Z
- Polecenia uzupełniające: Mocowanie, Komentarz, Stop, Wstawka G-code, Sonda, G-code z kształtu
- Modyfikacja zadania: Kopia operacji w zadaniu, Szyk, Szybka kopia
- Operacje specjalne: Frezowanie gwintów
- Różności: Obszar, Obszar płaszczyzny roboczej
- Konstrukcja narzędzi: Narzędzia, Kształt narzędzia, Końcówki skrawające, Biblioteka narzędzi, Kontroler narzędzi
- Dodatek: Preferencje, Tworzenie skryptów
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Złożenie, BIM, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework