CAM: Symulator

From FreeCAD Documentation
Revision as of 18:46, 29 January 2024 by NewJoker (talk | contribs) (Created page with "==Użycie==")

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

Path Simulator

Lokalizacja w menu
Ścieżka → Symulator CAM
Środowisko pracy
Path
Domyślny skrót
P M
Wprowadzono w wersji
-
Zobacz także
Path: Przeglądaj polecenia ścieżki

Opis

Narzędzie Symulator CAM umożliwia symulację procesu obróbki poprzez przemieszczanie modeli 3D narzędzi po ścieżkach G-Code, odejmując materiał obrabiany tam gdzie narzędzie go przecina, zapewniając wizualizację zadania obróbki. Umożliwia to wykrywanie i izolowanie błędów przed uruchomieniem obróbki na maszynie.

Użycie

  1. There are several ways to invoke the command:
    • Press the Path Simulator button.
    • Select the Path → CAM Simulator option from the menu.
    • Use the keyboard shortcut: P then M.
  2. De-select any Operations that are not to be simulated
  3. Tune the Speed and Accuracy settings.
  4. Select the Job for simulation from the drop menu.
  5. Use the Path Simulator toolbar to invoke different actions:
    • Press the (Play) button to play or playback an animation of the operations.
    • Press the (Fast Forward) button to increase the speed substantially (in order to quickly review complicated paths).
    • Press the (Pause) button to pause animation for troubleshooting purposes
    • Press the (Single-Step) button for slowing down the animation, this functionality helps troubleshooting and resolving specific cuts and/or movements.
    • Press the (Stop) button to stop the animation.
  6. Press the Cancel button will remove the stock created for the simulation. If you press OK this object will be kept in your Job.

Properties

  • DANEPlayback Speed: The speed of the simulation playback, in G-code lines/second
  • DANEAccuracy: The accuracy of the simulation expressed as a percentage indicating the simulations deviation from the Job. For interactive simulation, reducing accuracy to 0.3 works much faster.
  • DANEJob: The Job used as the basis of the simulation
  • DANEOperation List: The list of Operations selected for inclusion in the simulation.


Template:Path Tools navi/pl