CAM: Symulator
Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.
Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.
Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.
Path Simulator |
Lokalizacja w menu |
---|
Ścieżka → Symulator CAM |
Środowisko pracy |
Path |
Domyślny skrót |
P M |
Wprowadzono w wersji |
- |
Zobacz także |
Path: Przeglądaj polecenia ścieżki |
Opis
Narzędzie Symulator CAM umożliwia symulację procesu obróbki poprzez przemieszczanie modeli 3D narzędzi po ścieżkach G-Code, odejmując materiał obrabiany tam gdzie narzędzie go przecina, zapewniając wizualizację zadania obróbki. Umożliwia to wykrywanie i izolowanie błędów przed uruchomieniem obróbki na maszynie.
Usage
- There are several ways to invoke the command:
- Press the Path Simulator button.
- Select the Path → CAM Simulator option from the menu.
- Use the keyboard shortcut: P then M.
- De-select any Operations that are not to be simulated
- Tune the Speed and Accuracy settings.
- Select the Job for simulation from the drop menu.
- Use the Path Simulator toolbar to invoke different actions:
- Press the (Play) button to play or playback an animation of the operations.
- Press the (Fast Forward) button to increase the speed substantially (in order to quickly review complicated paths).
- Press the (Pause) button to pause animation for troubleshooting purposes
- Press the (Single-Step) button for slowing down the animation, this functionality helps troubleshooting and resolving specific cuts and/or movements.
- Press the (Stop) button to stop the animation.
- Press the Cancel button will remove the stock created for the simulation. If you press OK this object will be kept in your Job.
Properties
- DANEPlayback Speed: The speed of the simulation playback, in G-code lines/second
- DANEAccuracy: The accuracy of the simulation expressed as a percentage indicating the simulations deviation from the Job. For interactive simulation, reducing accuracy to 0.3 works much faster.
- DANEJob: The Job used as the basis of the simulation
- DANEOperation List: The list of Operations selected for inclusion in the simulation.
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Złożenie, BIM, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework