MES: Grupa siatki

From FreeCAD Documentation
Revision as of 12:08, 20 November 2023 by NewJoker (talk | contribs) (Created page with "==Użycie==")

Grupa siatki

Lokalizacja w menu
Siatka → Grupa siatki MES
Środowisko pracy
MES
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Poradnik MES

Opis

Umożliwia tworzenie grup wierzchołków, krawędzi, powierzchni i elementów. Jest to przydatne gdy FreeCAD jest używany jako preprocessor do eksportu zorganizowanej i oznakowanej siatki. Siatka może być wtedy użyta przez zewnętrzne solvery, gdzie grupy siatki mogą być łatwiejsze w użyciu do definiowania warunków brzegowych i przypisywania właściwości związanych z solverem. Możliwe jest użycie nazwy obiektu grupy siatki lub oznaczenia jako nazwy grupy do eksportu siatki. Jeśli wybrane jest oznaczenie, należy uważać na znaki specjalne. Jeśli format eksportu ich nie wspiera, należy użyć nazwy obiektu grupy siatki.

To narzędzie umożliwia więc używanie programu FreeCAD z zewnętrznymi solverami (lub przeglądarkami takimi jak ParaView), które nie są obecnie zaimplementowane we FreeCAD.

Użycie

  1. To enable the function a mesh must be first provided FEM mesh from shape by Gmsh
  2. Then select the Mesh object in the Tree view and either
    • Press the FEM mesh group button in the FEM toolbar
    • Select the Mesh → FEM mesh group option from the drop-down menu.
  3. Select whether the group is named or labeled
    • If Name is selected, the name of the MeshGroup is used when exporting the mesh.
    • If Label is selected, the specified label name will be used when exporting the mesh.
  4. Click the OK button.
  5. Close the task.
    Result: You now should see a new FEMMeshGroup object under the FEMMeshGMSH object in your active analysis container.
  6. Double-click on the FEMMeshGMSH parent object in your Model Tree and press Apply to force a mesh recalculation / relabeling.
  7. Close the task.

Notes

  • After the mesh has been created, you can change the label property using the property editor.
  • After you change a property, you must reopen the Gmsh dialog again and click the Apply button (you can leave the dialog open while changing properties).
  • You can create as many different mesh groups as needed.