Draft EinrastenAufArbeitsebene

From FreeCAD Documentation
Revision as of 21:28, 2 July 2023 by FBXL5 (talk | contribs) (Created page with "Siehe Draft-Einrasten.")

/deDraft EinrastenAufArbeitsebene

Menüeintrag
Keiner
Arbeitsbereich
Draft, Arch
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Draft Einrasten, Draft EinrastenSperren, Draft EbeneAuswählen

Beschreibung

Die Option Draft EinrastenAufArbeitsebene projiziert Einrast-Punkte auf die aktuelle Arbeitsebene. Sie kann nur in Kombination mit anderen Einrast-Optionen verwendet werden.

Einrasten des zweiten Punktes einer Linie auf den projizierten Endpunkt einer Kante

Anwendung

For general information about snapping see Draft Snap.

  1. Optionally change the working plane.
  2. Make sure snapping is enabled. See Draft Snap Lock.
  3. If Draft Snap WorkingPlane is not active do one of the following:
    • Press the button in the Draft snap toolbar.
    • Press the button in the Draft snap widget.
  4. Make sure at least one other snap option is active.
  5. Choose a Draft or Arch command to create your geometry.
  6. Note that you can also change snap options while a command is active.
  7. Move the cursor over the object you want to snap to.
  8. The object is highlighted.
  9. If a snap point is found it is projected onto the working plane where it is marked.
  10. Click to confirm the point.

Siehe Draft-Einrasten.