TechDraw Workbench/ro: Difference between revisions
(Updating to match new version of source page) |
(Updating to match new version of source page) |
||
(12 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
{{Docnav |
{{Docnav |
||
|[[Surface_Workbench|Surface Workbench]] |
|[[Surface_Workbench|Surface Workbench]] |
||
|[[External_workbenches|External workbenches]] |
|||
|[[Web_Workbench|Web Workbench]] |
|||
|IconL=Workbench_Surface.svg |
|IconL=Workbench_Surface.svg |
||
|IconR= |
|IconR=AddonManager.svg |
||
}} |
}} |
||
Line 16: | Line 16: | ||
La pagină pot fi adăugate simboluri, secțiuni, suprafețe hașurate, adnotări și simboluri [[SVG|SVG]], care pot fi exportate în continuare în diferite formate ca [[DXF|DXF]], [[SVG|SVG]] și [[PDF|PDF]]. |
La pagină pot fi adăugate simboluri, secțiuni, suprafețe hașurate, adnotări și simboluri [[SVG|SVG]], care pot fi exportate în continuare în diferite formate ca [[DXF|DXF]], [[SVG|SVG]] și [[PDF|PDF]]. |
||
⚫ | |||
TechDraw a fost oficial inclus în FreeCAD începând cu versiunea 0.17; acesta este destinat să înlocuiască [[Drawing Workbench|Drawing Workbench]]. Ambele benzi de lucru sunt încă furnizate în v0.17, dar Workbench-ul de desen poate fi eliminat în versiunile viitoare. Pentru a ține pasul cu planurile și evoluțiile TechDraw, vizitați [[TechDraw Roadmap|TechDraw Roadmap]].. |
|||
⚫ | |||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
||
Line 42: | Line 38: | ||
</div> |
</div> |
||
* [[File: |
* [[File:TechDraw_FillTemplateFields.svg|32px]] [[TechDraw_FillTemplateFields|Update template fields]]: {{Version|1.0}} |
||
* [[File: |
* [[File:TechDraw_RedrawPage.svg|32px]] [[TechDraw_RedrawPage|Redraw Page]]: forces an update of the selected page. |
||
* [[File:TechDraw_PrintAll.svg|32px]] [[TechDraw_PrintAll|Print All Pages]]: prints all pages in a document. {{Version|0.21}} |
|||
<span id="Views"></span> |
<span id="Views"></span> |
||
Line 51: | Line 49: | ||
Acestea sunt instrumente pentru crearea de Vizualizare obiecte. |
Acestea sunt instrumente pentru crearea de Vizualizare obiecte. |
||
⚫ | |||
* [[File:TechDraw_View.svg|32px]] [[TechDraw_View/ro|New View]]: adaugă o vedere de proiecție 2D a unui obiect. |
* [[File:TechDraw_View.svg|32px]] [[TechDraw_View/ro|New View]]: adaugă o vedere de proiecție 2D a unui obiect. |
||
⚫ | |||
* [[File: |
* [[File:TechDraw_BrokenView.svg|32px]] [[TechDraw_BrokenView|Insert BrokenView]]: adds a broken view of one or more objects. {{Version|1.0}} |
||
* [[File:TechDraw_ActiveView.svg|32px]] [[TechDraw_ActiveView|Insert Active View]]: inserts a view of the active 3D view. |
|||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
||
Line 65: | Line 67: | ||
</div> |
</div> |
||
:* [[File:TechDraw_ComplexSection.svg|32px]] [[TechDraw_ComplexSection|Insert Complex Section View]]: inserts a cross-section view of an existing view based on a profile. {{Version| |
:* [[File:TechDraw_ComplexSection.svg|32px]] [[TechDraw_ComplexSection|Insert Complex Section View]]: inserts a cross-section view of an existing view based on a profile. {{Version|0.21}} |
||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
||
Line 83: | Line 85: | ||
</div> |
</div> |
||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
* [[File:TechDraw_ShareView.svg|32px]] [[TechDraw_ShareView|Share View]]: shares a view between multiple pages. {{Version|0.20}} |
* [[File:TechDraw_ShareView.svg|32px]] [[TechDraw_ShareView|Share View]]: shares a view between multiple pages. {{Version|0.20}} |
||
Line 95: | Line 99: | ||
* <span id="TechDraw_StackGroup">[[File:TechDraw_StackTop.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Adjust Stacking Order:</span><!--Do not edit span id: the TechDraw_StackGroup pages redirect here--> |
* <span id="TechDraw_StackGroup">[[File:TechDraw_StackTop.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Adjust Stacking Order:</span><!--Do not edit span id: the TechDraw_StackGroup pages redirect here--> |
||
:* [[File:TechDraw_StackTop.svg|32px]] [[TechDraw_StackTop|Move view to top of stack]]: moves views to the top of the stacking order. {{Version| |
:* [[File:TechDraw_StackTop.svg|32px]] [[TechDraw_StackTop|Move view to top of stack]]: moves views to the top of the stacking order. {{Version|0.21}} |
||
:* [[File:TechDraw_StackBottom.svg|32px]] [[TechDraw_StackBottom|Move view to bottom of stack]]: moves views to the bottom of the stacking order. {{Version| |
:* [[File:TechDraw_StackBottom.svg|32px]] [[TechDraw_StackBottom|Move view to bottom of stack]]: moves views to the bottom of the stacking order. {{Version|0.21}} |
||
:* [[File:TechDraw_StackUp.svg|32px]] [[TechDraw_StackUp|Move view up one level]]: moves views up one level in the stacking order. {{Version| |
:* [[File:TechDraw_StackUp.svg|32px]] [[TechDraw_StackUp|Move view up one level]]: moves views up one level in the stacking order. {{Version|0.21}} |
||
:* [[File:TechDraw_StackDown.svg|32px]] [[TechDraw_StackDown|Move view down one level]]: moves views down one level in the stacking order. {{Version| |
:* [[File:TechDraw_StackDown.svg|32px]] [[TechDraw_StackDown|Move view down one level]]: moves views down one level in the stacking order. {{Version|0.21}} |
||
<span id="Clips"></span> |
|||
==Măști== |
|||
Acestea sunt instrumente pentru a crea și a gestiona vederile mascate Clip objects |
|||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
<span id="Decorations"></span> |
<span id="Decorations"></span> |
||
Line 182: | Line 169: | ||
* <span id="TechDraw_ExtentGroup">[[File:TechDraw_HorizontalExtentDimension.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Insert Extent Dimensions:</span><!--Do not edit span id: the TechDraw_ExtentGroup pages redirect here--> |
* <span id="TechDraw_ExtentGroup">[[File:TechDraw_HorizontalExtentDimension.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Insert Extent Dimensions:</span><!--Do not edit span id: the TechDraw_ExtentGroup pages redirect here--> |
||
:* [[File:TechDraw_HorizontalExtentDimension.svg|32px]] [[TechDraw_HorizontalExtentDimension|Insert Horizontal Extent Dimension]]: adds a horizontal extent dimension. |
:* [[File:TechDraw_HorizontalExtentDimension.svg|32px]] [[TechDraw_HorizontalExtentDimension|Insert Horizontal Extent Dimension]]: adds a horizontal extent dimension. |
||
:* [[File:TechDraw_VerticalExtentDimension.svg|32px]] [[TechDraw_VerticalExtentDimension|Insert Vertical Extent Dimension]]: adds a vertical extent dimension. |
:* [[File:TechDraw_VerticalExtentDimension.svg|32px]] [[TechDraw_VerticalExtentDimension|Insert Vertical Extent Dimension]]: adds a vertical extent dimension. |
||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
||
Line 190: | Line 177: | ||
</div> |
</div> |
||
* [[File:TechDraw_Balloon.svg|32px]] [[TechDraw_Balloon|Insert Balloon Annotation]]: adds a "balloon" annotation to a page. |
* [[File:TechDraw_Balloon.svg|32px]] [[TechDraw_Balloon|Insert Balloon Annotation]]: adds a "balloon" annotation to a page. |
||
* [[File:TechDraw_AxoLengthDimension.svg|32px]] [[TechDraw_AxoLengthDimension|Insert Axonometric Length Dimension]]: adds an axonometric length dimension. {{Version| |
* [[File:TechDraw_AxoLengthDimension.svg|32px]] [[TechDraw_AxoLengthDimension|Insert Axonometric Length Dimension]]: adds an axonometric length dimension. {{Version|0.21}} |
||
* [[File:TechDraw_LandmarkDimension.svg|32px]] [[TechDraw_LandmarkDimension|Insert Landmark Dimension - EXPERIMENTAL]]: adds a landmark distance dimension. |
* [[File:TechDraw_LandmarkDimension.svg|32px]] [[TechDraw_LandmarkDimension|Insert Landmark Dimension - EXPERIMENTAL]]: adds a landmark distance dimension. |
||
* [[File:TechDraw_DimensionRepair.svg|32px]] [[TechDraw_DimensionRepair|Dimension Repair]]: can adjust the 2D or 3D geometry references of a dimension. {{Version| |
* [[File:TechDraw_DimensionRepair.svg|32px]] [[TechDraw_DimensionRepair|Dimension Repair]]: can adjust the 2D or 3D geometry references of a dimension. {{Version|0.21}} |
||
== Annotations == |
== Annotations == |
||
Line 206: | Line 193: | ||
</div> |
</div> |
||
* [[File:TechDraw_LeaderLine.svg|32px]] [[TechDraw_LeaderLine|Add Leaderline to View]]: adds a leaderline to a view. |
* [[File:TechDraw_LeaderLine.svg|32px]] [[TechDraw_LeaderLine|Add Leaderline to View]]: adds a leaderline to a view. |
||
* [[File:TechDraw_RichTextAnnotation.svg|32px]] [[TechDraw_RichTextAnnotation|Insert Rich Text Annotation]]: adds an rich text block as annotation to a leaderline or a view. |
* [[File:TechDraw_RichTextAnnotation.svg|32px]] [[TechDraw_RichTextAnnotation|Insert Rich Text Annotation]]: adds an rich text block as annotation to a leaderline or a view. |
||
* <span id="TechDraw_CosmeticVertexGroup">[[File:TechDraw_CosmeticVertex.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Add Cosmetic Vertices:</span><!--Do not edit span id: the TechDraw_CosmeticVertexGroup pages redirect here--> |
* <span id="TechDraw_CosmeticVertexGroup">[[File:TechDraw_CosmeticVertex.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Add Cosmetic Vertices:</span><!--Do not edit span id: the TechDraw_CosmeticVertexGroup pages redirect here--> |
||
:* [[File:TechDraw_CosmeticVertex.svg|32px]] [[TechDraw_CosmeticVertex|Add Cosmetic Vertex]]: adds a Vertex which is not part of the source geometry. |
:* [[File:TechDraw_CosmeticVertex.svg|32px]] [[TechDraw_CosmeticVertex|Add Cosmetic Vertex]]: adds a Vertex which is not part of the source geometry. |
||
:* [[File:TechDraw_Midpoints.svg|32px]] [[TechDraw_Midpoints|Add Midpoint Vertices]]: adds Cosmetic Vertices at midpoints of selected edges. |
:* [[File:TechDraw_Midpoints.svg|32px]] [[TechDraw_Midpoints|Add Midpoint Vertices]]: adds Cosmetic Vertices at midpoints of selected edges. |
||
:* [[File:TechDraw_Quadrants.svg|32px]] [[TechDraw_Quadrants|Add Quadrant Vertices]]: adds Cosmetic Vertices at quarter points of selected (circular) edges. |
:* [[File:TechDraw_Quadrants.svg|32px]] [[TechDraw_Quadrants|Add Quadrant Vertices]]: adds Cosmetic Vertices at quarter points of selected (circular) edges. |
||
* <span id="TechDraw_CenterLineGroup">[[File:TechDraw_FaceCenterLine.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Add Centerlines:</span><!--Do not edit span id: the TechDraw_CenterLineGroup pages redirect here--> |
* <span id="TechDraw_CenterLineGroup">[[File:TechDraw_FaceCenterLine.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Add Centerlines:</span><!--Do not edit span id: the TechDraw_CenterLineGroup pages redirect here--> |
||
:* [[File:TechDraw_FaceCenterLine.svg|32px]] [[TechDraw_FaceCenterLine|Add Centerline to Faces]]: adds a centerline to selected face(s). |
:* [[File:TechDraw_FaceCenterLine.svg|32px]] [[TechDraw_FaceCenterLine|Add Centerline to Faces]]: adds a centerline to selected face(s). |
||
:* [[File:TechDraw 2LineCenterLine.svg|32px]] [[TechDraw_2LineCenterLine|Add Centerline between 2 Lines]]: adds a centerline between 2 lines. |
:* [[File:TechDraw 2LineCenterLine.svg|32px]] [[TechDraw_2LineCenterLine|Add Centerline between 2 Lines]]: adds a centerline between 2 lines. |
||
:* [[File:TechDraw 2PointCenterLine.svg|32px]] [[TechDraw_2PointCenterLine|Add Centerline between 2 Points]]: adds a centerline between 2 points. |
:* [[File:TechDraw 2PointCenterLine.svg|32px]] [[TechDraw_2PointCenterLine|Add Centerline between 2 Points]]: adds a centerline between 2 points. |
||
* [[File:TechDraw_2PointCosmeticLine.svg|32px]] [[TechDraw_2PointCosmeticLine|Add Cosmetic Line Through 2 points]]: adds a cosmetic line connecting 2 vertices. |
* [[File:TechDraw_2PointCosmeticLine.svg|32px]] [[TechDraw_2PointCosmeticLine|Add Cosmetic Line Through 2 points]]: adds a cosmetic line connecting 2 vertices. |
||
* [[File: |
* [[File:TechDraw_CosmeticCircle.svg|32px]] [[TechDraw_CosmeticCircle|Add Cosmetic Circle]]: adds a cosmetic circle. {{Version|1.0}} |
||
* [[File:TechDraw_DecorateLine.svg|32px]] [[TechDraw_DecorateLine|Change Appearance of Lines]]: changes the appearance of selected line(s). |
* [[File:TechDraw_DecorateLine.svg|32px]] [[TechDraw_DecorateLine|Change Appearance of Lines]]: changes the appearance of selected line(s). |
||
* [[File:TechDraw_ShowAll.svg|32px]] [[TechDraw_ShowAll|Show/Hide Invisible Edges]]: shows/hides invisible lines/edges in a view. |
* [[File:TechDraw_ShowAll.svg|32px]] [[TechDraw_ShowAll|Show/Hide Invisible Edges]]: shows/hides invisible lines/edges in a view. |
||
* [[File:TechDraw_WeldSymbol.svg|32px]] [[TechDraw_WeldSymbol|Add Welding Information to Leader]]: adds welding specifications to an existing leaderline. |
* [[File:TechDraw_WeldSymbol.svg|32px]] [[TechDraw_WeldSymbol|Add Welding Information to Leader]]: adds welding specifications to an existing leaderline. |
||
* [[File:TechDraw_SurfaceFinishSymbol.svg|32px]] [[TechDraw_SurfaceFinishSymbol|Add Surface Finish Symbol]]: adds a surface finish symbol to a page. {{Version| |
* [[File:TechDraw_SurfaceFinishSymbol.svg|32px]] [[TechDraw_SurfaceFinishSymbol|Add Surface Finish Symbol]]: adds a surface finish symbol to a page. {{Version|0.21}} |
||
* [[File:TechDraw_HoleShaftFit.svg|32px]] [[TechDraw_HoleShaftFit|Add Hole/Shaft Fit]]: adds hole or shaft tolerances using ISO 286 to a dimension. {{Version| |
* [[File:TechDraw_HoleShaftFit.svg|32px]] [[TechDraw_HoleShaftFit|Add Hole/Shaft Fit]]: adds hole or shaft tolerances using ISO 286 to a dimension. {{Version|0.21}} |
||
== Extensions == |
== Extensions == |
||
Line 277: | Line 264: | ||
* [[File:TechDraw_ExtensionAreaAnnotation.svg|32px]] [[TechDraw_ExtensionAreaAnnotation|Calculate the area of selected faces]]: calculates the area of selected faces and inserts an area annotation. {{Version|0.20}} |
* [[File:TechDraw_ExtensionAreaAnnotation.svg|32px]] [[TechDraw_ExtensionAreaAnnotation|Calculate the area of selected faces]]: calculates the area of selected faces and inserts an area annotation. {{Version|0.20}} |
||
* [[File:TechDraw_ExtensionArcLengthAnnotation.svg|32px]] [[TechDraw_ExtensionArcLengthAnnotation|Calculate the arc length of selected edges]]: calculates the arc length of selected edges and inserts an arc length annotation. {{Version|1.0}} |
|||
* [[File:TechDraw_ExtensionCustomizeFormat.svg|32px]] [[TechDraw_ExtensionCustomizeFormat|Customize format label]]: customizes the formatting of a balloon text or dimension text. GD&T symbols and other special character can be added. {{Version|0.20}} |
* [[File:TechDraw_ExtensionCustomizeFormat.svg|32px]] [[TechDraw_ExtensionCustomizeFormat|Customize format label]]: customizes the formatting of a balloon text or dimension text. GD&T symbols and other special character can be added. {{Version|0.20}} |
||
Line 298: | Line 287: | ||
:* [[File:TechDraw_ExtensionThreadBoltBottom.svg|32px]] [[TechDraw_ExtensionThreadBoltBottom|Add Cosmetic Thread Bolt Bottom View]]: adds a cosmetic thread to the top or bottom view of bolts/screws/rods. {{Version|0.20}} |
:* [[File:TechDraw_ExtensionThreadBoltBottom.svg|32px]] [[TechDraw_ExtensionThreadBoltBottom|Add Cosmetic Thread Bolt Bottom View]]: adds a cosmetic thread to the top or bottom view of bolts/screws/rods. {{Version|0.20}} |
||
* [[File:TechDraw_ExtensionVertexAtIntersection.svg| |
* <span id="TechDraw_CommandVertexCreationGroup">[[File:TechDraw_ExtensionVertexAtIntersection.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Add Vertexes:</span><!--Do not edit span id: the TechDraw_CommandVertexCreationGroup pages redirect here--> |
||
:* [[File:TechDraw_ExtensionVertexAtIntersection.svg|32px]] [[TechDraw_ExtensionVertexAtIntersection|Add Cosmetic Intersection Vertex(es)]]: adds cosmetic vertex(es) at the intersection(s) of selected edges. {{Version|0.20}} |
|||
:* [[File:TechDraw_CommandAddOffsetVertex.svg|32px]] [[TechDraw_CommandAddOffsetVertex|Add an offset vertex]]: adds a cosmetic vertex at a specified offset from a selected vertex. {{Version|1.0}} |
|||
* <span id="TechDraw_ExtensionDrawCirclesGroup">[[File:TechDraw_ExtensionDrawCosmCircle.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Add Cosmetic Circles or Arcs:</span><!--Do not edit span id: the TechDraw_ExtensionDrawCirclesGroup pages redirect here--> |
* <span id="TechDraw_ExtensionDrawCirclesGroup">[[File:TechDraw_ExtensionDrawCosmCircle.svg|x32px]][[Image:Toolbar_flyout_arrow_blue_background.svg|x32px]] Add Cosmetic Circles or Arcs:</span><!--Do not edit span id: the TechDraw_ExtensionDrawCirclesGroup pages redirect here--> |
||
Line 375: | Line 368: | ||
* [[TechDraw_Templates|Templates]]: șabloanele implicite definite pentru paginile de desen. |
* [[TechDraw_Templates|Templates]]: șabloanele implicite definite pentru paginile de desen. |
||
</div> |
</div> |
||
== Obsolete tools == |
|||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
⚫ | |||
* [[File:TechDraw_CosmeticEraser.svg|32px]] [[TechDraw_CosmeticEraser|Remove Cosmetic Object]]: removes cosmetic objects from a page. Not available in {{VersionPlus|1.0}}. |
|||
⚫ | |||
== Preferences == |
== Preferences == |
||
Line 394: | Line 401: | ||
== Limitations == |
== Limitations == |
||
* Do not cut, copy and paste TechDraw objects in the [[Tree_view|Tree view]] as this generally does not work out well. |
|||
⚫ | |||
* Do not drag TechDraw objects in the [[Tree_view|Tree view]] with the mouse. |
|||
== Limitări == |
|||
** TechDraw drawings and its API are not interchangeable with the [[Drawing Workbench|Drawing Workbench]] and its API. It is possible to convert Drawing Pages to TechDraw Pages using a Python script ({{incode|moveViews.py}}). |
|||
* Este posibil să aveți atât TechDraw cât și Pagini de desen în același document FreeCAD, deoarece fiecare pagină este complet independentă una față de cealaltă. |
|||
* Există diferențe minore în specificarea textelor editabile în șabloanele [[SVG|SVG]] în comparație cu modulul Desenare. În TechDraw, scalarea documentului SVG afectează poziția câmpurilor de text editabile. Vedeți discuția pe forum [https://forum.freecadweb.org/viewtopic.php?f=3&t=24981&p=196271#p196271 Scala TechDraw șabloane] pentru mai multe detalii. |
|||
* Nu tăiați, copiați și lipiți obiecte TechDraw în vizualizarea arborescentă, deoarece în general aceasta nu funcționează bine. |
|||
⚫ | |||
<span id="Tutorials"></span> |
<span id="Tutorials"></span> |
||
Line 414: | Line 416: | ||
* TechDraw Workbench [https://www.youtube.com/watch?v=3zSdeFV6I5o Part 4 (Section and Detail)], [https://www.youtube.com/watch?v=kcmdJ7xa7gg Part 5 (Customizing Templates)] |
* TechDraw Workbench [https://www.youtube.com/watch?v=3zSdeFV6I5o Part 4 (Section and Detail)], [https://www.youtube.com/watch?v=kcmdJ7xa7gg Part 5 (Customizing Templates)] |
||
== Development == |
|||
Do you want to know about the future of the TechDraw Workbench? Visit [[TechDraw_Roadmap|the TechDraw Roadmap Page]] to learn more. |
|||
⚫ | |||
{{Docnav |
{{Docnav |
||
|[[Surface_Workbench|Surface Workbench]] |
|[[Surface_Workbench|Surface Workbench]] |
||
Line 421: | Line 428: | ||
|IconR=Workbench_Web.svg |
|IconR=Workbench_Web.svg |
||
}} |
}} |
||
⚫ | |||
{{TechDraw_Tools_navi{{#translation:}}}} |
{{TechDraw_Tools_navi{{#translation:}}}} |
Latest revision as of 18:52, 25 April 2024
Introducere
Tehnologia TechDraw Workbench este utilizată pentru a produce desene tehnice de bază de la modele 3D create cu un alt atelier de lucru, cum ar fi Part, PartDesign, sau Arch,sau importate din alte aplicații. Fiecare desen este o pagină care poate conține diferite Vizualizări ale obiectelor trasabile cum ar fi Part::Features, PartDesign::Bodies, App::Part groups, și Document Object groups. Desenele rezultate pot fi folosite pentru lucruri precum documentație, instrucțiunile de fabricație, contracte, permise etc.
La pagină pot fi adăugate simboluri, secțiuni, suprafețe hașurate, adnotări și simboluri SVG, care pot fi exportate în continuare în diferite formate ca DXF, SVG și PDF.
FreeCAD este în primul rând o aplicație de modelare 3D și, prin urmare, nu are multe instrumente de desenare 2D, care sunt incluse în cea mai mare parte în Draft și Sketcher Workbench. Dacă obiectivul dvs. principal constă în realizarea de desene complexe 2D și DXF și nu aveți nevoie de modelare 3D, vă recomandăm să luați în considerare un program software dedicat pentru redactarea tehnică, cum ar fi [https: //en.wikipedia .org / wiki / LibreCAD LibreCAD], QCad, TurboCad și altele.
Pagini
Acestea sunt instrumente pentru crearea obiectelor de pagină.
- Insert Default Page: adaugă o nouă pagină utilizând template implicit.
- Insert Page using Template: Adaugă o nouă pagină utilizând o selecție template.
- Redraw Page: forces an update of the selected page.
- Print All Pages: prints all pages in a document. introduced in version 0.21
Vederi
Acestea sunt instrumente pentru crearea de Vizualizare obiecte.
- New View: adaugă o vedere de proiecție 2D a unui obiect.
- Insert BrokenView: adds a broken view of one or more objects. introduced in version 1.0
- Insert Active View: inserts a view of the active 3D view.
- Insert Projection Group: învocă un dialog pentru crearea vederilor multiple din mai multe direcții.
- Insert Section View: adaugă o vedere în secțiune transversală într-o vizualizarea existentă deja.
- Insert Complex Section View: inserts a cross-section view of an existing view based on a profile. introduced in version 0.21
- Insert Detail View: adaugă un detaliu vizualizarea unei porțiuni dintr-o vizualizare existentă.
- Insert Draft Workbench Object: adaugă o vizualizare la un Obiect din Atelierul Draft Workbench.
- Insert Arch Workbench Object: adaugă o vizualizare la un obiect din Atelierul Arhitectură adaugă o vizualizare a Arch Workbench SectionPlane.
- Insert Spreadsheet View: inserează o vizualizare a unei foi de calcul Spreadsheet Workbench sheet.
- Insert Clip Group: inserează un grup de vederi mascate în secțiune într-o pagină.
- Share View: shares a view between multiple pages. introduced in version 0.20
- Project Shape: creates projections of shapes in the 3D view. introduced in version 0.20
Stacking
These are tools for changing the stacking order which controls the apparent depth of views on a page.
- Move view to top of stack: moves views to the top of the stacking order. introduced in version 0.21
- Move view to bottom of stack: moves views to the bottom of the stacking order. introduced in version 0.21
- Move view up one level: moves views up one level in the stacking order. introduced in version 0.21
- Move view down one level: moves views down one level in the stacking order. introduced in version 0.21
Decorațiune
Acestea sunt instrumente pentru modificarea aspectului paginilor și al vizualizărilor.
- Hatch Area: aplică un model de hașurare dintr-un fișier, unei fațete
- Apply Geometric Hatch to Face: aplică un model de trasură la o față folosind o specificație Autodesk PAT.
- New Symbol: inserază un simbol cartezian SVG în pagină.
- Turn View Frames On/Off: Comuntă on/off cadrele și etichete care înconjoară o pagină.
Cotare
Acestea sunt instrumente pentru a crea și lucra cu obiicte tip Cotă.
Cotele liniare pot fi bazate pe două puncte, o linie sau două linii.
- Insert Length Dimension: adaugă o cotă tip lungime.
- Insert Horizontal Dimension: adaugă o cotă orizontală tip lungime.
- New Vertical: adaugă o cotă tip lungime verticală
- Insert Radius Dimension: adaugă o cotă pentru raza unui cerc sau a unui arc de cerc.
- New Diameter: adaugă o cotă pentru diametrul unui cerc sau a unui arc de cerc.
- Insert Angle Dimension: adaugă o cotă pentru un unghi sau pentru două margini drepte.
- Insert 3-Point Angle Dimension: adaugă o cotă tip dimensiune unghiulară utilizând trei vârfuri.
- Insert Horizontal Extent Dimension: adds a horizontal extent dimension.
- Insert Vertical Extent Dimension: adds a vertical extent dimension.
- New Links: leagă o cotă existetnă de o formă geometrică 3 D
- Insert Balloon Annotation: adds a "balloon" annotation to a page.
- Insert Axonometric Length Dimension: adds an axonometric length dimension. introduced in version 0.21
- Insert Landmark Dimension - EXPERIMENTAL: adds a landmark distance dimension.
- Dimension Repair: can adjust the 2D or 3D geometry references of a dimension. introduced in version 0.21
Annotations
The annotation tools are for "marking up" a drawing with additional information.
- Insert Annotation: adaugă un bloc de text care servește ca adnotare
- Add Leaderline to View: adds a leaderline to a view.
- Insert Rich Text Annotation: adds an rich text block as annotation to a leaderline or a view.
- Add Cosmetic Vertex: adds a Vertex which is not part of the source geometry.
- Add Midpoint Vertices: adds Cosmetic Vertices at midpoints of selected edges.
- Add Quadrant Vertices: adds Cosmetic Vertices at quarter points of selected (circular) edges.
- Add Centerline to Faces: adds a centerline to selected face(s).
- Add Centerline between 2 Lines: adds a centerline between 2 lines.
- Add Centerline between 2 Points: adds a centerline between 2 points.
- Add Cosmetic Line Through 2 points: adds a cosmetic line connecting 2 vertices.
- Add Cosmetic Circle: adds a cosmetic circle. introduced in version 1.0
- Change Appearance of Lines: changes the appearance of selected line(s).
- Show/Hide Invisible Edges: shows/hides invisible lines/edges in a view.
- Add Welding Information to Leader: adds welding specifications to an existing leaderline.
- Add Surface Finish Symbol: adds a surface finish symbol to a page. introduced in version 0.21
- Add Hole/Shaft Fit: adds hole or shaft tolerances using ISO 286 to a dimension. introduced in version 0.21
Extensions
These are tools to improve your TechDraw drawings.
Attributes and modifications
- Select Line Attributes, Cascade Spacing and Delta Distance: selects the attributes (style, width and color) for new cosmetic lines and centerlines, and specifies the cascade spacing and delta distance. introduced in version 0.20
- Change Line Attributes: changes the attributes (style, width and color) of cosmetic lines and centerlines. introduced in version 0.20
- Extend Line: extends a cosmetic line or centerline at both ends. introduced in version 0.20
- Shorten Line: shortens a cosmetic line or centerline at both ends. introduced in version 0.20
- Lock/Unlock View: locks or unlocks the position of a view. introduced in version 0.20
- Position Section View: orthogonally aligns a section view with its source view. introduced in version 0.20
- Position Horizontal Chain Dimensions: aligns horizontal dimensions to create a chain dimension. introduced in version 0.20
- Position Vertical Chain Dimensions: aligns vertical dimensions to create a chain dimension. introduced in version 0.20
- Position Oblique Chain Dimensions: aligns oblique dimensions to create a chain dimension. introduced in version 0.20
- Cascade Horizontal Dimensions: evenly spaces horizontal dimensions. introduced in version 0.20
- Cascade Vertical Dimensions: evenly spaces vertical dimensions. introduced in version 0.20
- Cascade Oblique Dimensions: evenly spaces oblique dimensions. introduced in version 0.20
- Calculate the area of selected faces: calculates the area of selected faces and inserts an area annotation. introduced in version 0.20
- Calculate the arc length of selected edges: calculates the arc length of selected edges and inserts an arc length annotation. introduced in version 1.0
- Customize format label: customizes the formatting of a balloon text or dimension text. GD&T symbols and other special character can be added. introduced in version 0.20
Centerlines and threading
- Add Circle Centerlines: adds centerlines to circles and arcs. introduced in version 0.20
- Add Bolt Circle Centerlines: adds centerlines to a circular pattern of circles. introduced in version 0.20
- Add Cosmetic Thread Hole Side View: adds a cosmetic thread to the side view of a hole. introduced in version 0.20
- Add Cosmetic Thread Hole Bottom View: adds a cosmetic thread to the top or bottom view of holes. introduced in version 0.20
- Add Cosmetic Thread Bolt Side View: adds a cosmetic thread to the side view of a bolt/screw/rod. introduced in version 0.20
- Add Cosmetic Thread Bolt Bottom View: adds a cosmetic thread to the top or bottom view of bolts/screws/rods. introduced in version 0.20
- Add Cosmetic Intersection Vertex(es): adds cosmetic vertex(es) at the intersection(s) of selected edges. introduced in version 0.20
- Add an offset vertex: adds a cosmetic vertex at a specified offset from a selected vertex. introduced in version 1.0
- Add Cosmetic Circle: adds a cosmetic circle based on two vertexes. introduced in version 0.20
- Add Cosmetic Arc: adds a cosmetic counter clockwise arc based on three vertexes. introduced in version 0.20
- Add Cosmetic Circle 3 Points: adds a cosmetic circle based on three vertexes. introduced in version 0.20
- Add Cosmetic Parallel Line: adds a cosmetic line parallel to another line through a vertex. introduced in version 0.20
- Add Cosmetic Perpendicular Line: adds a cosmetic line perpendicular to another line through a vertex. introduced in version 0.20
Dimensions
- Create Horizontal Chain Dimensions: creates a sequence of aligned horizontal dimensions. introduced in version 0.20
- Create Vertical Chain Dimensions: creates a sequence of aligned vertical dimensions. introduced in version 0.20
- Create Oblique Chain Dimensions: creates a sequence of aligned oblique dimensions. introduced in version 0.20
- Create Horizontal Coordinate Dimensions: creates multiple evenly spaced horizontal dimensions starting from the same baseline. introduced in version 0.20
- Create Vertical Coordinate Dimensions: creates multiple evenly spaced vertical dimensions starting from the same baseline. introduced in version 0.20
- Create Oblique Coordinate Dimensions: creates multiple evenly spaced oblique dimensions starting from the same baseline. introduced in version 0.20
- Create Horizontal Chamfer Dimension: creates a horizontal size and angle dimension for a chamfer. introduced in version 0.20
- Create Vertical Chamfer Dimension: creates a vertical size and angle dimension for a chamfer. introduced in version 0.20
- Create Arc Length Dimension: creates an arc length dimension. introduced in version 0.20
- Insert '⌀' Prefix: inserts a '⌀' symbol at the beginning of the dimension text. introduced in version 0.20
- Insert '〼' Prefix: inserts a '〼' symbol at the beginning of the dimension text. introduced in version 0.20
- Remove Prefix: removes all symbols at the beginning of the dimension text. introduced in version 0.20
- Increase Decimal Places: increases the number of decimal places of the dimension text. introduced in version 0.20
- Decrease Decimal Places: decreases the number of decimal places of the dimension text. introduced in version 0.20
Import/Export
These are tools for exporting pages to other applications.
- Export Page as SVG: Salvează o pagină ca fișier SVG.
- Export Page as DXF: saves the current page as DXF file.
Caracteristici suplimentare
- Hatching: explică diverse tehnici de hașurare.
- Line Groups: Grosimi implicite pot fi asignate diferitor tipuri de linie.
- Templates: șabloanele implicite definite pentru paginile de desen.
Obsolete tools
- ClipPlus: Adaugă o vedere existentă la un grup mască.
- ClipMinus: Extrage o vedere dintr-un grup mascat.
- Remove Cosmetic Object: removes cosmetic objects from a page. Not available in version 1.0 and above.
- Move View: moves a view and its dependents to a different page. Not available in version 1.0 and above.
Preferences
Setările de elecție
- Preferences: preferințele pentru valorile implicite ale paginii desenului, cum ar fi unghiul de proiectare, culori, dimensiunile textului și stilurile de linie.
Scripting
Script-Programare
Instrumentele TechDraw pot fi utilizate în macros și din consola Python utilizând două API-uri.
Limitations
- Do not cut, copy and paste TechDraw objects in the Tree view as this generally does not work out well.
- Do not drag TechDraw objects in the Tree view with the mouse.
Tutoriale
- Basic TechDraw Tutorial: introducere în crearea de desene cu TechDraw Workbench.
- Crearea unui nou șablon: instrucțiuni pentru crearea unui nou șablon de pagină în Inkscape pentru utilizarea cu TechDraw Workbench.
Video tutorials by sliptonic
- TechDraw Workbench Part 1 (Basics), Part 2 (Dimensions), Part 3 (Multiview)
- TechDraw Workbench Part 4 (Section and Detail), Part 5 (Customizing Templates)
Development
Do you want to know about the future of the TechDraw Workbench? Visit the TechDraw Roadmap Page to learn more.
- Pages: Insert Default Page, Insert Page using Template, Redraw Page, Print All Pages
- Views: Insert View, Insert Active View, Insert Projection Group, Insert Section View, Insert Complex Section View, Insert Detail View, Insert Draft Workbench Object, Insert Arch Workbench Object, Insert Spreadsheet View, Insert Clip Group, Share View, Project Shape
- Stacking: Move view to top of stack, Move view to bottom of stack, Move view up one level, Move view down one level
- Decorations: Hatch Face using Image File, Apply Geometric Hatch to Face, Insert SVG Symbol, Insert Bitmap Image, Turn View Frames On/Off
- Dimensions: Insert Length Dimension, Insert Horizontal Dimension, Insert Vertical Dimension, Insert Radius Dimension, Insert Diameter Dimension, Insert Angle Dimension, Insert 3-Point Angle Dimension, Insert Horizontal Extent Dimension, Insert Vertical Extent Dimension, Link Dimension to 3D Geometry, Insert Balloon Annotation, Insert Axonometric Length Dimension, Insert Landmark Dimension, Adjust Geometric References of Dimension
- Annotations: Insert Annotation, Add Leaderline to View, Insert Rich Text Annotation, Add Cosmetic Vertex, Add Midpoint Vertices, Add Quadrant Vertices, Add Centerline to Faces, Add Centerline between 2 Lines, Add Centerline between 2 Points, Add Cosmetic Line Through 2 points, Add Cosmetic Circle, Change Appearance of Lines, Show/Hide Invisible Edges, Add Welding Information to Leader, Add Surface Finish Symbol, Add Hole or Shaft Tolerances
- Extensions:
- Attributes and modifications: Select Line Attributes, Cascade Spacing and Delta Distance, Change Line Attributes, Extend Line, Shorten Line, Lock/Unlock View, Position Section View, Position Horizontal Chain Dimensions, Position Vertical Chain Dimensions, Position Oblique Chain Dimensions, Cascade Horizontal Dimensions, Cascade Vertical Dimensions, Cascade Oblique Dimensions, Calculate the area of selected faces, Calculate the arc length of selected edges, Customize format label
- Centerlines and threading: Add Circle Centerlines, Add Bolt Circle Centerlines, Add Cosmetic Thread Hole Side View, Add Cosmetic Thread Hole Bottom View, Add Cosmetic Thread Bolt Side View, Add Cosmetic Thread Bolt Bottom View, Add Cosmetic Intersection Vertex(es), Add an offset vertex, Add Cosmetic Circle, Add Cosmetic Arc, Add Cosmetic Circle 3 Points, Add Cosmetic Parallel Line, Add Cosmetic Perpendicular Line
- Dimensions: Create Horizontal Chain Dimensions, Create Vertical Chain Dimensions, Create Oblique Chain Dimensions, Create Horizontal Coordinate Dimensions, Create Vertical Coordinate Dimensions, Create Oblique Coordinate Dimensions, Create Horizontal Chamfer Dimension, Create Vertical Chamfer Dimension, Create Arc Length Dimension, Insert '⌀' Prefix, Insert '〼' Prefix, Remove Prefix, Increase Decimal Places, Decrease Decimal Places
- Export: Export Page as SVG, Export Page as DXF
- Additional: Line Groups, Templates, Hatching, Geometric dimensioning and tolerancing, Preferences
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub