TechDraw ComplexSection

From FreeCAD Documentation
Other languages:

TechDraw ComplexSection

Menu location
TechDraw → TechDraw Views → Insert Complex Section
Workbenches
TechDraw
Default shortcut
None
Introduced in version
0.21
See also
TechDraw Section, TechDraw View, TechDraw Projection Group

Description

The TechDraw ComplexSection tool inserts a cross-section view based on an existing part view and a profile.

A Quarter section view created with the Complex Section tool

An Aligned section view created with the Complex Section tool

An Offset section view created with the Complex Section tool

Usage

  1. Select a part view and a profile object in the 3D view or Tree view. Profiles are typically Sketches, but any object whose shape can be made into a wire will work.
  2. There are several ways to invoke the tool:
    • Press the Insert Complex Section button.
    • Select the TechDraw → TechDraw Views → Insert Complex Section option from the menu.
  3. A task panel opens which will help calculate the various properties. Reasonable values for the view Direction are calculated, but these can be changed.

Properties ComplexSection

See also TechDraw SectionView.

Data

Cutting Tool

  • DataCutting Tool Wire Object: The document object whose shape will be used to generate the cutting profile.
  • DataProjection Strategy: Controls how the cut is performed and how the result is projected on the page:
    • Offset: Performs a simple cut of the Source shape and projects the result.
    • Aligned: Cuts the Source shape using a tool created from each segment (edge) of the cutting profile. The results of each cut are projected in a vertical or horizontal array, depending on the orientation of the cutting profile.
    • NoParallel: As Aligned, but profile segments which are parallel to the view direction are skipped.

Notes

See TechDraw SectionView

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

A ComplexSection can be created with macros and from the Python console by using the following functions:

doc = FreeCAD.ActiveDocument
box = doc.Box
profile = doc.Sketch
page = doc.Page

view = doc.addObject("TechDraw::DrawViewPart", "View")
page.addView(view)
view.Source = box
view.Direction = (0, 0, 1)

section = doc.addObject("TechDraw::DrawComplexSection", "ComplexSection")
page.addView(section)
section.BaseView = view
section.CuttingToolWireObject = profile
section.Direction = (0, 1, 0)
section.SectionNormal = (-1, 0, 0)

Examples

For some more information about section views and some use cases, have a look at: TechDraw section examples.