Visualizza rotazione oggetti

From FreeCAD Documentation
Revision as of 21:01, 15 June 2020 by Renatorivo (talk | contribs) (Created page with "* Per ulteriori informazioni sulla modalità a schermo intero, consultare il comando Vista 3D a schermo intero.")

Visualizza rotazione oggetti

Posizione nel menu
Strumenti → Visualizza rotazione oggetti...
Ambiente
Tutti
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

Il comando Visualizza rotazione oggetti ruota continuamente la telecamera in una vista 3D.

La finestra di dialogo Visualizza rotazione oggetti

Utilizzo

  1. Select the Tools → View turntable... option from the menu.
  2. The View Turntable dialog box opens.
  3. Move the Angle slider to tilt the camera's virtual turn table.
  4. Move the Speed slider to adjust the rotation speed of the camera.
  5. Check the Fullscreen checkbox to switch the 3D view to fullscreen mode.
  6. The Enable timer option is not supported at this time.
  7. Press the Play button. The button will stay pushed in and its text will change to Stop.
  8. In fullscreen mode the dialog will disappear after ca. 5 seconds. It will reappear if the mouse is moved over the 3D view.
  9. Press the Stop button to stop the camera rotation.
  10. Optionally change settings and restart.
  11. Press the Close button to close the dialog box.

Note