Elementy Złączne: Przesuń

From FreeCAD Documentation
Revision as of 08:52, 15 August 2023 by Kaktus (talk | contribs) (Created page with "{{GuiCommand/pl |Name=Fasteners Move |Name/pl=Elementy Złączne: Przesuń element złączny |MenuLocation=Elementy Złączne → Przesuń element złączny |Workbenches=Elementy Złączne }}")

Elementy Złączne: Przesuń element złączny

Lokalizacja w menu
Elementy Złączne → Przesuń element złączny
Środowisko pracy
Elementy Złączne
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
brak

Opis

Polecenie Przesuń element złączny przenosi i dołącza element złączny do okrągłej krawędzi. Może być również użyte do odłączenia elementu złącznego. Dołączony element złączny ma właściwość DANEbaza Obiektu, a jego właściwość DANEUmiejscowienie jest dynamicznie powiązana z tym obiektem.

Użycie

Attach

On the left a fastener and a circular edge are selected. On the right the fastener has been moved and attached to the selected edge.

  1. Select a single fastener and a single circular edge.
  2. There are several ways to invoke the command:
    • Press the Move fastener button.
    • Select the Fasteners → Move fastener option from the menu.
  3. The fastener moves to the selected edge and is attached to it.

Detach

  1. Select a single fastener.
  2. There are several ways to invoke the command:
    • Press the Move fastener button.
    • Select the Fasteners → Move fastener option from the menu.
  3. The fastener is detached.