Elementy Złączne: Przesuń

From FreeCAD Documentation
Revision as of 08:46, 15 August 2023 by Kaktus (talk | contribs) (Created page with "Polecenie 24px '''Przesuń element złączny''' przenosi i dołącza element złączny do okrągłej krawędzi. Może być również użyte do odłączenia elementu złącznego. Dołączony element złączny ma właściwość {{PropertyData|baza Obiektu}}, a jego właściwość {{PropertyData|Umiejscowienie}} jest dynamicznie powiązana z tym obiektem.")

Fasteners Move

Menu location
Fasteners → Move fastener
Workbenches
Fasteners
Default shortcut
None
Introduced in version
-
See also
None

Opis

Polecenie Przesuń element złączny przenosi i dołącza element złączny do okrągłej krawędzi. Może być również użyte do odłączenia elementu złącznego. Dołączony element złączny ma właściwość DANEbaza Obiektu, a jego właściwość DANEUmiejscowienie jest dynamicznie powiązana z tym obiektem.

Usage

Attach

On the left a fastener and a circular edge are selected. On the right the fastener has been moved and attached to the selected edge.

  1. Select a single fastener and a single circular edge.
  2. There are several ways to invoke the command:
    • Press the Move fastener button.
    • Select the Fasteners → Move fastener option from the menu.
  3. The fastener moves to the selected edge and is attached to it.

Detach

  1. Select a single fastener.
  2. There are several ways to invoke the command:
    • Press the Move fastener button.
    • Select the Fasteners → Move fastener option from the menu.
  3. The fastener is detached.