Fasteners MatchTypeInner/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Opis==")
No edit summary
Line 3: Line 3:
{{Docnav/pl
{{Docnav/pl
|[[Fasteners_Shape/pl|Uprość kształt]]
|[[Fasteners_Shape/pl|Uprość kształt]]
|[[Fasteners_MatchTypeOuter/pl|Dopasowanie do otworu przelotowego]]
|[[Fasteners_MatchTypeOuter/pl|Dopasowanie otworu jako przelotowego]]
|[[Fasteners_Workbench/pl|środowisko pracy Elementy złączne]]
|[[Fasteners_Workbench/pl|środowisko pracy Elementy złączne]]
|IconL=Fasteners_Shape.svg
|IconL=Fasteners_Shape.svg

Revision as of 10:45, 15 August 2023

Other languages:

Fasteners MatchTypeInner

Lokalizacja w menu
Elementy złączne → Dopasowanie do otworu pod gwintownik
Środowisko pracy
Elementy złączne
Domyślny skrót
brak
Wprowadzono w wersji
-
Zobacz także
Dopasowanie do otworu przelotowego

Opis

The Fasteners MatchTypeInner command behaves as a toggle with the Fasteners MatchTypeOuter command. When Fasteners MatchTypeInner is selected, circular edges are considered to be tap holes when new fasteners are attached to them. This determines the default dimensions of those fasteners. This setting is not used for countersunk screws.

Usage

  1. There are several ways to invoke the command:
    • Press the Match for tap hole button.
    • Select the Fasteners → Match for tap hole option from the menu.
  2. The button stays depressed to indicate the selected option.