Elementy Złączne: Zmień parametry

From FreeCAD Documentation
Revision as of 10:11, 15 August 2023 by Kaktus (talk | contribs) (Created page with "{{GuiCommand/pl |Name=Fasteners ChangeParameters |Name/pl=Elementy Złączne: Zmień parametry |MenuLocation=Elementy Złączne → Zmień parametry |Workbenches=Elementy Złączne |Shortcut=Brak |SeeAlso= }}")
Other languages:

Elementy Złączne: Zmień parametry

Lokalizacja w menu
Elementy Złączne → Zmień parametry
Środowisko pracy
Elementy Złączne
Domyślny skrót
Brak
Wprowadzono w wersji
-
Zobacz także
brak

Description

The Fasteners ChangeParameters command can be used to change the parameters of fasteners.

Usage

  1. Select one or more fasteners. If multiple fasteners are selected they must be either only screws, only washers or only nuts.
  2. There are several ways to invoke the command:
  3. The Change fastener parameters task panel open.
  4. Optionally change the Fastener type.
  5. Optionally change the diameter by doing one of the following:
    • Check the Auto set diameter checkbox to match the diameter of the fasteners with the edge they are attached to.
    • Uncheck the Auto set diameter checkbox and select a Diameter from the dropdown list.
  6. Leave the Set length check box unchecked. This option currently does not work.