Draft Snap WorkingPlane/de: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
No edit summary
Line 15: Line 15:
|Name=Draft WorkingPlane|Name/de=Draft Arbeitsebene
|Name=Draft WorkingPlane|Name/de=Draft Arbeitsebene
|MenuLocation=Entwurf → [[Draft Snap/de|Objektfang]] → Arbeitsebene
|MenuLocation=Entwurf → [[Draft Snap/de|Objektfang]] → Arbeitsebene
|Workbenches=[[Draft Module|Draft]], [[Arch Module|Arch]]
|Workbenches=[[Draft_Workbench/de|Draft]], [[Arch_Workbench/de|Arch]]
|SeeAlso=[[Draft Snap/de|Draft Objektfang]], [[Draft SelectPlane/de|Draft Ebene markieren]]
|SeeAlso=[[Draft Snap/de|Draft Objektfang]], [[Draft SelectPlane/de|Draft Ebene markieren]]
}}
}}

Revision as of 06:44, 28 August 2021

Draft Arbeitsebene

Menüeintrag
Entwurf → Objektfang → Arbeitsebene
Arbeitsbereich
Draft, Arch
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Draft Objektfang, Draft Ebene markieren

Beschreibung

Diese Methode platziert immer einen neuen Punkt auf der aktuellen Arbeitsebene, selbst wenn eine andere Einrastmethode verwendet und ein Punkt außerhalb dieser Arbeitsebene ausgewählt wird.

Einrasten des zweiten Punkts einer Linie an einem Endpunkt einer Kante eines Körpers, der dann auf die XY-Ebene projiziert wird

Anwendung

  1. Optionally change the working plane.
  2. Make sure snapping is enabled. See Draft Snap Lock.
  3. If Draft Snap WorkingPlane is not active do one of the following:
    • Press the button in the Draft Snap toolbar.
    • Press the button in the Draft snap widget.
  4. Make sure at least one other snap option is active.
  5. Choose a Draft or Arch command to create your geometry.
  6. Note that you can also change snap options while a command is active.
  7. Move the cursor over the object you want to snap to.
  8. The object is highlighted.
  9. If a snap point is found it is projected onto the working plane where it is marked.
  10. Click to confirm the point.

See Draft Snap.