Środowisko pracy Kształty zakrzywione

From FreeCAD Documentation
Revision as of 06:19, 5 August 2021 by Kaktus (talk | contribs) (Created page with "Środowisko pracy Kształty zakrzywione")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Other languages:

Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.

Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.

Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.

CurvedShapes External Workbench Icon

Introduction

Curved Shapes is a FreeCAD external workbench that creates 3D shapes from 2D curves.

Installation

Recommended installation is through the FreeCAD Addon Manager via the Tools → Addon Manager

Note: for manual installation see Manual installation

Tools

  • CurvedArray: Creates an array and resizes the items in the bounds of one or more hull curves.
  • CurvedSegment: Interpolates between two 2D curves. The interpolated curves can be resized in the bounds of some hullcurves.
  • InterpolatedMiddle: Interpolates a 2D shape into the middle between two 2D curves. The base shapes can be connected to a shape with a sharp corner.
  • SurfaceCut: Cuts a surface to get the outline curve or a face. This tool is similar to Cross-Sections in the Part workbench, but it is fully parametric and has an option to reduce the complexity of the output curve. It tries to remove overlapping edges.

Examples

References

Related

External Workbenches