CAM: Grawer
Ta dokumentacja nie jest ukończona. Prosimy o pomoc w tworzeniu dokumentacji.
Strona Model polecenia GUI wyjaśnia jak powinny być dokumentowane polecenia. Przejrzyj stronę Category:UnfinishedDocu, aby zobaczyć więcej niekompletnych stron, takich jak ta. Zobacz stronę Category:Command Reference aby poznać wszystkie komendy.
Zobacz stronę wytycznych Wikidla FreeCAD aby dowiedzieć się, jak edytować strony Wiki, i przejdź do strony Pomóż w rozwoju FreeCAD, aby dowiedzieć się o innych sposobach, w jakie możesz wnieść swój wkład.
Path Engrave |
Menu location |
---|
Path → Engrave |
Workbenches |
Path |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
The Engrave tool is primarily for engraving a Draft ShapeString onto a part. However, it may be useful for other kinds of 2D.
Usage
Empty
Options
Empty
Properties
Data
Base
- DANEPlacement:
- DANELabel: User name of the object (UTF-8)
Depth
- DANEClearance Height: The height needed to clear clamps and obstructions
- DANEFinal Depth: Final Depth of Tool- lowest value in Z
- DANESafe Height: The above which Rapid motions are allowed.
- DANEStart Depth: Starting Depth of Tool- first cut depth in Z
- DANEStep Down: Incremental Step Down of Tool
Path
- DANEActive: Make False, to prevent operation from generating code
- DANEBase: The base geometry for this operation
- DANEComment: An optional comment for this operation
- DANECoolant Mode: Coolant mode for this operation
- DANECycle Time: Estimated cycle time for this operation
- DANEStart Vertex: The vertex index to start the path from
- DANETool Controller: The tool controller that will be used to calculate the path
- DANEUser Label: User assigned label
Hidden
- DANEBase Object:
- DANEBase Shapes:
- DANEExpression Engine:
- DANELabel2:
- DANEPath:
- DANEProxy:
- DANEVisibility:
View
Empty
Scripting
See also: FreeCAD Scripting Basics.
Example:
#Place code example here.
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework