Elementy Złączne: Dopasowanie otworu jako przelotowego
Elementy złączne: Dopasowanie otworu jako przelotowego |
Lokalizacja w menu |
---|
Elementy złączne → Match for pass hole |
Środowisko pracy |
Elementy złączne |
Domyślny skrót |
brak |
Wprowadzono w wersji |
- |
Zobacz także |
Dopasowanie do otworu pod gwint |
Opis
The Fasteners MatchTypeOuter command behaves as a toggle with the Fasteners MatchTypeInner command. When Fasteners MatchTypeOuter is selected, circular edges are considered to be pass holes when new fasteners are attached to them. This determines the default dimensions of those fasteners. This setting is not used for countersunk screws.
Usage
- There are several ways to invoke the command:
- Press the Match for pass hole button.
- Select the Fasteners → Match for pass hole option from the menu.
- The button stays depressed to indicate the selected option.
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Złożenie, BIM, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework