Std SelBack: Difference between revisions

From FreeCAD Documentation
(Docnav)
(Docnav)
Line 6: Line 6:
|[[Std_TreeSelection|TreeSelection]]
|[[Std_TreeSelection|TreeSelection]]
|[[Std_SelForward|SelForward]]
|[[Std_SelForward|SelForward]]
|[[Std_Base|Std Base]]
|[[Std_View_Menu|Std View Menu]]
|IconL=Std_TreeSelection.svg
|IconL=Std_TreeSelection.svg
|IconR=Std_SelForward.svg
|IconR=Std_SelForward.svg
Line 43: Line 43:
|[[Std_TreeSelection|TreeSelection]]
|[[Std_TreeSelection|TreeSelection]]
|[[Std_SelForward|SelForward]]
|[[Std_SelForward|SelForward]]
|[[Std_Base|Std Base]]
|[[Std_View_Menu|Std View Menu]]
|IconL=Std_TreeSelection.svg
|IconL=Std_TreeSelection.svg
|IconR=Std_SelForward.svg
|IconR=Std_SelForward.svg

Revision as of 19:52, 9 October 2023

Std SelBack

Menu location
None
Workbenches
All
Default shortcut
None
Introduced in version
0.19
See also
Std LinkSelectLinked, Std LinkSelectLinkedFinal, Std LinkSelectAllLinks, Std SelForward

Description

The Std SelBack command restores the previous recorded Tree view selection. Note that selections are only recorded if Tree RecordSelection mode is switched on.

Usage

  1. There has to be a previous Tree view selection.
  2. Press the Back button.
  3. The previous selection is restored.

Notes

  • Only Tree view selections are recorded. To record a selection made in the 3D view a final object has to be added in the Tree view.