Std LinkMakeRelative/de: Difference between revisions

From FreeCAD Documentation
(Created page with "== Eigenschaften ==")
(Created page with "== Skripten ==")
Line 42: Line 42:
In particular, {{PropertyData|Link Transform}} is set to {{TRUE}}, so {{PropertyData|Placement}} becomes hidden, and instead {{PropertyData|Link Placement}} controls the position of the Link with respect to the position of {{PropertyData|Linked Object}}.
In particular, {{PropertyData|Link Transform}} is set to {{TRUE}}, so {{PropertyData|Placement}} becomes hidden, and instead {{PropertyData|Link Placement}} controls the position of the Link with respect to the position of {{PropertyData|Linked Object}}.


== Scripting ==
== Skripten ==


See [[Std_LinkMake|Std LinkMake]] for the general information.
See [[Std_LinkMake|Std LinkMake]] for the general information.

Revision as of 19:54, 7 May 2021

Std LinkMakeRelative

Menu location
None
Workbenches
All
Default shortcut
None
Introduced in version
0.19
See also
Std Part, Std Group, Std LinkMake

Beschreibung

Std LinkMakeRelative creates an App Link (App::Link class), just like Std LinkMake, but it operates on selected subelements first, and sets the DatenLink Transform to true.

Anwendung

With selection:

  1. Select a subelement in the 3D view, this means a vertex, edge, or face, or any combination of these. These subelements must belong to a single object.
  2. Press the Std LinkMakeRelative button. The produced object has the same icon as the original object, but has two arrow overlays indicating it is a relative Link.

Without selection:

  • If no object is selected, this command does nothing.
  • If an object is selected in the tree view only, but no subelement is selected in the 3D view, the command does nothing either.

Original body, and three Links created from the subelements of it, including edges and faces.

Eigenschaften

This command creates a new App Link; its properties are described in Std LinkMake.

In particular, DatenLink Transform is set to true, so DatenPlacement becomes hidden, and instead DatenLink Placement controls the position of the Link with respect to the position of DatenLinked Object.

Skripten

See Std LinkMake for the general information.

An App Link is created with the addObject() method of the document. To define a relative link, its setLink method is used to pick the source object, and one or more of its subelements. Then the LinkTransform attribute is set to True.

import FreeCAD as App

doc = App.newDocument()
body = App.ActiveDocument.addObject("Part::Box", "Box")

obj = App.ActiveDocument.addObject("App::Link", "Link")
obj.setLink(body, '', ['Edge1', 'Edge6', 'Edge7', 'Edge10', 'Face2', 'Face3'])
obj.LinkTransform = True
obj.LinkPlacement.Base = App.Vector(20, 20, 0)
App.ActiveDocument.recompute()